AD621BNZ vs AD621AR 비교
다음의 상세 나란히 비교: AD621BNZ 제조: Analog Devices 및 AD621AR 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD621BNZ | AD621AR |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Instrumentation amplifier | Single-channel instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Supply Voltage Range | ±2.3 V to ±18 V | — |
| 패키지 | 8-pin PDIP | 8-SOIC |
| Input Offset Voltage | 125 µV typical | [DATA_NEEDED: input offset voltage] |
| Bandwidth | 800 kHz typical | — |
| Slew Rate | 1.2 V/µs typical | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio | 120 dB to 130 dB, condition dependent | [DATA_NEEDED: minimum common-mode rejection ratio] |
| Gain | 10 or 100, pin-strappable | — |
| 출력 유형 | Single-ended | — |
| Input Bias Current | 1 nA listed for AD621BNZ comparison | [DATA_NEEDED: input bias current] |
| Operating Voltage | ±2.3 V to ±18 V | — |
| Internal Gain Setting | Internal resistor gain | — |
| ESD Protection | Yes | — |
| 실장 유형 | Through-hole | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| 출력 전압 범위 | [DATA_NEEDED: output voltage range] | — |
| Reference Input Range | [DATA_NEEDED: reference input range] | — |
| Manufacturer | — | Analog Devices |
| Number of Circuits | — | 1 circuit |
| Architecture | — | Integrated three-op-amp instrumentation-amplifier architecture |
| Power Class | — | Low power |
| Drift Class | — | Low drift |
| Accuracy Class | — | High accuracy |
| 공급 전압 | — | ±18 V maximum |
| Gain Range | — | 10 to 10,000 |
| Gain Error | — | [DATA_NEEDED: maximum gain error] |
| Gain Drift | — | [DATA_NEEDED: maximum gain drift] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: gain-dependent bandwidth] |