AD623BNZ vs AD623ANZ 比較
詳細な並列比較: AD623BNZ メーカー: Analog Devices および AD623ANZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | AD623BNZ | AD623ANZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Single-circuit instrumentation amplifier | Instrumentation amplifier |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | Supported |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Bandwidth | 800 kHz | — |
| Slew Rate | 0.3 V/µs | — |
| Input Offset Voltage | 100 µV maximum | — |
| Number of Amplifiers | 1 circuit | — |
| Gain Programming | User-programmable resistor | Single external gain-set resistor |
| パッケージ | 8-pin PDIP | 8-PDIP |
| ピン数 | 8 pins | — |
| 実装タイプ | Through-hole PDIP | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| 出力電圧範囲 | [DATA_NEEDED: output voltage range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Noise | [DATA_NEEDED: input noise] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | Not applicable |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |