AD623BNZ vs AD623ANZ 비교
다음의 상세 나란히 비교: AD623BNZ 제조: Analog Devices 및 AD623ANZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD623BNZ | AD623ANZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Single-circuit instrumentation amplifier | Instrumentation amplifier |
| Supply Voltage Range | 2.7 V to 12 V | 2.7 V to 12 V |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | Supported |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Bandwidth | 800 kHz | — |
| Slew Rate | 0.3 V/µs | — |
| Input Offset Voltage | 100 µV maximum | — |
| Number of Amplifiers | 1 circuit | — |
| Gain Programming | User-programmable resistor | Single external gain-set resistor |
| 패키지 | 8-pin PDIP | 8-PDIP |
| 핀 수 | 8 pins | — |
| 실장 유형 | Through-hole PDIP | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| 출력 전압 범위 | [DATA_NEEDED: output voltage range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Noise | [DATA_NEEDED: input noise] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | Not applicable |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |