ATSAMG55J19B-AUT vs ATSAMG55-XPRO 比較
詳細な並列比較: ATSAMG55J19B-AUT メーカー: Microchip Technology および ATSAMG55-XPRO メーカー: Microchip Technology。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Microchip Technology
ATSAMG55J19B-AUT - ARM Cortex-M4 MCU 120MHz 512KB LQFP-64
ATSAMG55J19B-AUT ✓ 生産中Microchip Technology
ATSAMG55-XPRO - SAM G55 ARM Cortex-M4 Xplained Pro Kit | Microchip
ATSAMG55-XPRO ✓ 生産中仕様比較
| パラメータ | ATSAMG55J19B-AUT | ATSAMG55-XPRO |
|---|---|---|
| ブランド | Microchip Technology | Microchip Technology |
| カテゴリ | Microcontrollers | Development Boards |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $5.42 | $40.25 |
| Core Architecture | ARM Cortex-M4 with single-precision FPU | ARM 32-bit Cortex-M4 with single-precision FPU and DSP extensions |
| 最大クロック周波数 | 120 MHz | — |
| Program Memory (Flash) | 512 KB (512K x 8) | — |
| SRAM | 176 KB | — |
| Operating Voltage Range | 1.62 V to 3.6 V | — |
| パッケージ | 64-pin LQFP (10x10 mm) | — |
| 実装タイプ | Surface Mount | Through-hole male header pins (extension), surface-mount PCB |
| 動作温度範囲 | -40C to +85C (Industrial) | — |
| データバス幅 | 32-bit | — |
| Number of I/O Pins | Up to 47 (per datasheet) | — |
| USB Interface | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| Audio Interface | I2S (digital audio) | — |
| ADC | 12-bit, 16-channel (per datasheet) | — |
| Timers/PWM | 16-bit timers, PWM channels (per datasheet) | — |
| Communication Peripherals | USART, SPI, TWI/I2C | — |
| DMA | Peripheral DMA controller | — |
| RoHS ステータス | Compliant | Compliant (per Microchip product page) |
| Delivery Form | Tape & Reel (AUT suffix) | — |
| Series | SAM G55 | — |
| Silicon Revision | B | — |
| Product Type | — | Evaluation / Development Kit (Xplained Pro) |
| Target MCU | — | ATSAMG55J19B (SAM G55, ARM Cortex-M4 with FPU) |
| Maximum CPU Clock | — | 120 MHz |
| Low-frequency Crystal | — | 32.768 kHz |
| Supported OS (IDE) | — | Windows 7 / Windows XP (Atmel Studio / Microchip Studio) |
| On-board Debugger | — | EDBG (USB interface, programming + debug) |
| Extension Headers | — | 2x Xplained Pro extension headers + mikroBUS socket |
| User Interface | — | Mechanical buttons, user LEDs |
| Power Input | — | USB (powered via EDBG) and external connector |
| Form Factor | — | Xplained Pro standard PCB |
| Family | — | SAM G55 Xplained Pro |
| Toolchain Support | — | Microchip Studio / Atmel Studio, ASF, GCC ARM |