BTS621L1E3128ABUMA1 vs BTS723GWXUMA1 比較
詳細な並列比較: BTS621L1E3128ABUMA1 メーカー: Infineon および BTS723GWXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Infineon
BTS621L1E3128ABUMA1 - 24V Dual Hi-Side Switch, 8mΩ PROFET | Infineon
BTS621L1E3128ABUMA1 ✓ 生産中
仕様比較
| パラメータ | BTS621L1E3128ABUMA1 | BTS723GWXUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $2.45 | $1.24 |
| Product Type | Dual-channel smart high-side power switch (PROFET) | Smart High-Side Power Switch |
| Number of Channels | 2 (dual high-side, 1:1) | 2 (dual independent high-side) |
| FET Topology | N-Channel vertical power MOSFET with charge pump | — |
| On-State Resistance Rds(on) | 8 mΩ typical per channel | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Maximum Supply Voltage | 24 V (load-dump survivable) | — |
| Continuous Load Current | 4.4 A per channel | — |
| 動作温度範囲 | -40 °C to +150 °C junction | -40 C to +150 C (junction) |
| パッケージ | PG-TO263-7-2 (D2PAK-7, exposed tab) | PG-DSO-14-37 (14-pin DSO with exposed thermal pad) |
| 実装タイプ | Surface Mount | Surface Mount |
| Input Logic Compatibility | CMOS-compatible, ground-referenced | CMOS-compatible |
| Diagnostic Feedback | Yes - open-load and overtemperature reporting | — |
| Embedded Protection | Overload, current limit, short-circuit, thermal shutdown, overvoltage (load dump), fast demagnetization, reverse battery | — |
| Technology | Smart SIPMOS (monolithic) | Classic PROFET™ (SMART7 vertical N-channel) |
| RoHS / Lead-Free | Compliant (Pb-free) | — |
| Nominal Operating Voltage (Vbb) | — | 6 V to 24 V |
| Load-Dump Survivability (Vbb(load-dump)) | — | Up to 40 V (per Classic PROFET spec) |
| Continuous Load Current per Channel (I_L(nom)) | — | 2.5 A |
| On-State Resistance per Channel (R_DS(on) typ) | — | [DATA_NEEDED: R_DS(on) at 25 C, full datasheet requires login] |
| Standby Current (I_bb(off)) | — | Very low (a few µA typical) |
| Diagnostic Output | — | Current-mirror status / fault flag (shared) |
| Protection Features | — | Overload, short circuit, ESD, over-temperature, over-voltage (active clamp) |
| Inductive Load Switching | — | Active Zener clamp for fast demagnetization |
| Automotive Qualification | — | AEC-Q100 qualified |
| RoHS Compliance | — | Compliant |