ICS722M vs ICS651M 比較
詳細な並列比較: ICS722M メーカー: Renesas Electronics および ICS651M メーカー: Renesas Electronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ICS722M | ICS651M |
|---|---|---|
| ブランド | Renesas Electronics | Renesas Electronics |
| カテゴリ | Clock & Timing | Clock & Timing |
| ライフサイクル状態 | Unknown | 有効 |
| Oscillator Type | Voltage-controlled crystal oscillator (VCXO) | — |
| Manufacturer | Renesas Electronics | Renesas Electronics Corporation |
| Maximum Frequency | 28 MHz | 200 MHz |
| Nominal Frequency | 27 MHz to 28 MHz depending on source | — |
| Supply Voltage Range | 3.15 V to 3.45 V | 1.425 V to 2.625 V |
| Nominal Supply Voltage | 3.3 V | — |
| 出力タイプ | CMOS | — |
| Number of Circuits | 1 | — |
| PLL | No | — |
| Input Type | Crystal | — |
| Input-to-Output Ratio | 2:1 | — |
| パッケージ | 8-SOIC, 0.154 inch × 3.90 mm width | 8-SOIC (0.154 inch, 3.90 mm width) |
| 実装タイプ | Surface mount | Surface Mount |
| Packaging | Tube | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Control Voltage Range | [DATA_NEEDED: control voltage range] | — |
| Frequency Tuning Range | [DATA_NEEDED: frequency tuning range] | — |
| RMS Jitter | [DATA_NEEDED: RMS jitter] | — |
| Phase Noise | [DATA_NEEDED: phase noise] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Clock Fanout Buffer (Distribution) IC |
| Fanout Ratio | — | 1:4 |
| Input Signal Type | — | Clock |
| Output Signal Type | — | Clock |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |