ICS722M vs ICS651M 比較
詳細並排比較 ICS722M 由 Renesas Electronics 與 ICS651M 由 Renesas Electronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | ICS722M | ICS651M |
|---|---|---|
| 品牌 | Renesas Electronics | Renesas Electronics |
| 類別 | Clock & Timing | Clock & Timing |
| 生命週期狀態 | Unknown | 啟用中 |
| Oscillator Type | Voltage-controlled crystal oscillator (VCXO) | — |
| Manufacturer | Renesas Electronics | Renesas Electronics Corporation |
| Maximum Frequency | 28 MHz | 200 MHz |
| Nominal Frequency | 27 MHz to 28 MHz depending on source | — |
| Supply Voltage Range | 3.15 V to 3.45 V | 1.425 V to 2.625 V |
| Nominal Supply Voltage | 3.3 V | — |
| 輸出類型 | CMOS | — |
| Number of Circuits | 1 | — |
| PLL | No | — |
| Input Type | Crystal | — |
| Input-to-Output Ratio | 2:1 | — |
| 封裝 | 8-SOIC, 0.154 inch × 3.90 mm width | 8-SOIC (0.154 inch, 3.90 mm width) |
| 安裝類型 | Surface mount | Surface Mount |
| Packaging | Tube | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Control Voltage Range | [DATA_NEEDED: control voltage range] | — |
| Frequency Tuning Range | [DATA_NEEDED: frequency tuning range] | — |
| RMS Jitter | [DATA_NEEDED: RMS jitter] | — |
| Phase Noise | [DATA_NEEDED: phase noise] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| 供應電流 | [DATA_NEEDED: supply current] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Clock Fanout Buffer (Distribution) IC |
| Fanout Ratio | — | 1:4 |
| Input Signal Type | — | Clock |
| Output Signal Type | — | Clock |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |