INA128PA vs INA129PA 比較
詳細な並列比較: INA128PA メーカー: Texas Instruments および INA129PA メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA128PA | INA129PA |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Number of Circuits | 1 circuit | — |
| パッケージ | 8-pin PDIP | 8-pin plastic DIP |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| 静止電流 | 700 µA | [DATA_NEEDED: quiescent current] |
| Maximum Input Offset Voltage | 50 µV | 50 uV |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Input Protection | ±40 V | — |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| 動作温度 | -40°C to +85°C | — |
| 実装タイプ | Through-hole | Through-hole |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Maximum Input Offset Drift | — | 0.5 uV/degC |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Protected Input Voltage | — | -40 V to +40 V |
| Wide Supply Range | — | Plus or minus 18 V |
| 動作温度範囲 | — | -40 degC to +85 degC |
| Gain-Setting Resistor | — | 49.4 kilohm |
| Gain Equation | — | [DATA_NEEDED: INA129 gain equation] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Maximum Output Voltage | — | [DATA_NEEDED: maximum output voltage] |
| 最大出力電流 | — | [DATA_NEEDED: maximum output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |