INA129UAG4 vs INA129UA 比較
詳細な並列比較: INA129UAG4 メーカー: Texas Instruments および INA129UA メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
INA129UAG4 ✓ 生産中仕様比較
| パラメータ | INA129UAG4 | INA129UA |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Gain Range | 1 to 10,000 | — |
| Input Offset Voltage | 25 µV typical | 50 µV maximum |
| Input Bias Current | 5 nA typical | 5 nA maximum |
| Input Protection Range | ±40 V | ±40 V |
| Minimum Supply Voltage | 1.8 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| 動作温度範囲 | -40°C to +85°C | -40 °C to +125 °C |
| パッケージ | 8-SOIC, 0.154 inch width, 3.90 mm body width | 8-pin SOIC (D) |
| 実装タイプ | Surface mount | Surface mount |
| Architecture | Three-op-amp with current-feedback input circuitry | — |
| Gain Setting | External resistor | Single external resistor |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | 0.5 µV/°C maximum |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Amplifier Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Supply Voltage Range | — | ±18 V maximum |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |