INA129UAG4 vs INA129UA 比較
詳細並排比較 INA129UAG4 由 Texas Instruments 與 INA129UA 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
INA129UAG4 ✓ 啟用中規格比較
| 參數 | INA129UAG4 | INA129UA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Gain Range | 1 to 10,000 | — |
| Input Offset Voltage | 25 µV typical | 50 µV maximum |
| Input Bias Current | 5 nA typical | 5 nA maximum |
| Input Protection Range | ±40 V | ±40 V |
| Minimum Supply Voltage | 1.8 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| 工作溫度範圍 | -40°C to +85°C | -40 °C to +125 °C |
| 封裝 | 8-SOIC, 0.154 inch width, 3.90 mm body width | 8-pin SOIC (D) |
| 安裝類型 | Surface mount | Surface mount |
| Architecture | Three-op-amp with current-feedback input circuitry | — |
| Gain Setting | External resistor | Single external resistor |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | 0.5 µV/°C maximum |
| 供應電流 | [DATA_NEEDED: supply current] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Amplifier Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 120 dB minimum |
| Supply Voltage Range | — | ±18 V maximum |
| Minimum Total Supply Voltage | — | 4.5 V |
| Maximum Gain | — | 10,000 V/V |
| Minimum Gain | — | 1 V/V |
| Input Noise at 1 kHz | — | 8 nV/√Hz typical |