ISL8485EIP vs ISL8483EIP 比較
詳細な並列比較: ISL8485EIP メーカー: Renesas Electronics および ISL8483EIP メーカー: Renesas Electronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Renesas Electronics
ISL8483EIP - 5V ESD-Protected RS-485/RS-422 Transceiver | Renesas
ISL8483EIP ✓ 生産中仕様比較
| パラメータ | ISL8485EIP | ISL8483EIP |
|---|---|---|
| ブランド | Renesas Electronics | Renesas Electronics |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Single RS-485/RS-422 transceiver | — |
| Number of Transceivers | 1 transceiver | — |
| Communications Modes | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 5 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Driver Output Protection | Short-circuit current limiting | — |
| Thermal Protection | On-chip thermal shutdown | On-chip thermal shutdown |
| ESD Protection | ±15 kV on each driver output and receiver input | ±15 kV |
| ESD Latch-up Protection | Yes | — |
| Process Technology | BiCMOS | — |
| パッケージ | 8-pin PDIP | 8-pin PDIP |
| 実装タイプ | Through-hole | Through-hole |
| RoHS ステータス | Compliant | Compliant |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Receiver Input Common-Mode Range | [DATA_NEEDED: receiver input common-mode range] | — |
| Maximum Driver Output Current | [DATA_NEEDED: maximum driver output current] | — |
| Device Type | — | Single RS-485/RS-422 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| 電源電圧 | — | 5 V |
| Supported Standards | — | RS-485 and RS-422 |
| Implementation Technology | — | BiCMOS |
| Driver Short-Circuit Protection | — | On-chip short-circuit current limiting |
| ピン数 | — | 8 pins |
| データレート | — | [DATA_NEEDED: maximum data rate] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Voltage Range | — | [DATA_NEEDED: receiver input voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |