ISL8485EIP vs ISL8483EIP 比較
詳細並排比較 ISL8485EIP 由 Renesas Electronics 與 ISL8483EIP 由 Renesas Electronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Renesas Electronics
ISL8483EIP - 5V ESD-Protected RS-485/RS-422 Transceiver | Renesas
ISL8483EIP ✓ 啟用中規格比較
| 參數 | ISL8485EIP | ISL8483EIP |
|---|---|---|
| 品牌 | Renesas Electronics | Renesas Electronics |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Single RS-485/RS-422 transceiver | — |
| Number of Transceivers | 1 transceiver | — |
| Communications Modes | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 5 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Driver Output Protection | Short-circuit current limiting | — |
| Thermal Protection | On-chip thermal shutdown | On-chip thermal shutdown |
| ESD Protection | ±15 kV on each driver output and receiver input | ±15 kV |
| ESD Latch-up Protection | Yes | — |
| Process Technology | BiCMOS | — |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| RoHS 狀態 | Compliant | Compliant |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Receiver Input Common-Mode Range | [DATA_NEEDED: receiver input common-mode range] | — |
| Maximum Driver Output Current | [DATA_NEEDED: maximum driver output current] | — |
| Device Type | — | Single RS-485/RS-422 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| 供應電壓 | — | 5 V |
| Supported Standards | — | RS-485 and RS-422 |
| Implementation Technology | — | BiCMOS |
| Driver Short-Circuit Protection | — | On-chip short-circuit current limiting |
| 腳位數 | — | 8 pins |
| 資料速率 | — | [DATA_NEEDED: maximum data rate] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Voltage Range | — | [DATA_NEEDED: receiver input voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |