L9779WD vs L9679P 比較
詳細な並列比較: L9779WD メーカー: STMicroelectronics および L9679P メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | L9779WD | L9679P |
|---|---|---|
| ブランド | STMicroelectronics | STMicroelectronics |
| カテゴリ | Power MOSFET Drivers | Specialized PMIC |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $5.85 | $6.18 |
| Manufacturer | STMicroelectronics | — |
| Part Number | L9779WD | — |
| Description | Multifunction IC for engine management system | — |
| Technology | BCD6S | — |
| パッケージ | 64-pin HiQUAD power package | 100-TQFP (14x14 mm) |
| 実装タイプ | Surface Mount (Power Package) | Surface Mount |
| Supply Voltage (VSUP) | 6 V to 18 V (40 V transient) | — |
| 5V MCU Regulator | 5 V nominal, up to 250 mA | — |
| 5V Sensor Supply | 5 V nominal, up to 150 mA | — |
| Communication Interface | SPI (serial peripheral interface) | SPI (4-wire, configurable) |
| Watchdog | SPI challenge/response with Markov chain | Internal window watchdog |
| Injection Predrivers | 4 channels (INJ1-INJ4) | — |
| Ignition Predrivers | Integrated | — |
| Stepper Predriver | 2 channels (idle air control / throttle) | — |
| Relay Drivers | Main relay, oil/oxygen sensor relay | — |
| Tachometer / Hall Input | TACH | — |
| Reverse Battery Protection | External diode on KEY_ON (internal pull-down) | — |
| 動作温度 | -40 C to +150 C (junction) | -40 C to +125 C (AEC-Q100) |
| Qualification | AEC-Q100 automotive grade | — |
| RoHS ステータス | Compliant | Compliant |
| 機能 | — | Automotive advanced airbag IC for mid/high-end applications |
| ピン数 | — | 100 |
| Pitch | — | 0.5 mm |
| 電源電圧 | — | 5 V to 18 V nominal; up to 40 V transient |
| Battery Voltage Range | — | 6 V to 18 V (extended 4 V to 40 V for cold-crank and load-dump) |
| Squib Driver Channels | — | 4 high-side / low-side channels |
| Sensor Interface | — | Up to 4 analog sensor channels |
| Diagnostic Features | — | Squib resistance measurement, short-to-battery / short-to-ground detection, open-load detection |
| Automotive Qualification | — | AEC-Q100 qualified |
| Process Technology | — | BCD (Bipolar-CMOS-DMOS) |
| MSLレベル | — | 3 (168 hours) |