LM2903AQTH-13 vs LM2903QTH-13 比較
詳細な並列比較: LM2903AQTH-13 メーカー: Diodes Incorporated および LM2903QTH-13 メーカー: Diodes Incorporated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Diodes Incorporated
LM2903AQTH-13 - 36V Dual Automotive Comparator | Diodes Incorporated
LM2903AQTH-13 ✓ 生産中仕様比較
| パラメータ | LM2903AQTH-13 | LM2903QTH-13 |
|---|---|---|
| ブランド | Diodes Incorporated | Diodes Incorporated |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Comparator Type | Dual differential voltage comparator | Standard (General Purpose) |
| Number of Comparators | 2 | — |
| Supply Voltage Maximum | 36 V | — |
| Input Offset Voltage, A Grade | 1 mV | — |
| Input Offset Voltage, Non-A Grade | 2 mV | — |
| Input Common-Mode Voltage Range | Includes ground | — |
| Differential Input Voltage Range | Equal to the power-supply voltage | — |
| Low Output Saturation Voltage | 200 mV at 4 mA | — |
| 出力タイプ | Open collector | — |
| Output Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Input Offset Voltage | 1 mV | 2 mV |
| Input Bias Current | 25 nA | 25 nA |
| 電源電流 | 0.6 mA | 0.6 mA per channel |
| 静止電流 | 5 nA | — |
| Automotive Qualification | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 1 |
| パッケージ | 8-pin TSSOP | 8-TSSOP |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度 | [DATA_NEEDED: operating temperature range] | — |
| RoHS ステータス | Fully RoHS Compliant | RoHS3 compliant |
| Lead-Free Status | Totally Lead-Free | — |
| Halogen and Antimony | Free | — |
| Device Type | — | Dual differential voltage comparator |
| Number of Channels | — | 2 |
| Maximum Supply Voltage | — | 36 V |
| Input Offset Current | — | 5 nA |
| 出力構成 | — | Open-collector (open-drain), requires external pull-up |
| ピン数 | — | 8 pins |
| REACH Status | — | REACH compliant |
| Moisture Sensitivity Level | — | MSL Level 1 |
| Mold Compound | — | Green mold compound |
| PPAP Support | — | Supported |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |