LM2903AQTH-13 vs LM2903QTH-13 비교
다음의 상세 나란히 비교: LM2903AQTH-13 제조: Diodes Incorporated 및 LM2903QTH-13 제조: Diodes Incorporated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Diodes Incorporated
LM2903AQTH-13 - 36V Dual Automotive Comparator | Diodes Incorporated
LM2903AQTH-13 ✓ 활성사양 비교
| 파라미터 | LM2903AQTH-13 | LM2903QTH-13 |
|---|---|---|
| 브랜드 | Diodes Incorporated | Diodes Incorporated |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Dual differential voltage comparator | Standard (General Purpose) |
| Number of Comparators | 2 | — |
| Supply Voltage Maximum | 36 V | — |
| Input Offset Voltage, A Grade | 1 mV | — |
| Input Offset Voltage, Non-A Grade | 2 mV | — |
| Input Common-Mode Voltage Range | Includes ground | — |
| Differential Input Voltage Range | Equal to the power-supply voltage | — |
| Low Output Saturation Voltage | 200 mV at 4 mA | — |
| 출력 유형 | Open collector | — |
| Output Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Input Offset Voltage | 1 mV | 2 mV |
| Input Bias Current | 25 nA | 25 nA |
| 공급 전류 | 0.6 mA | 0.6 mA per channel |
| 대기 전류 | 5 nA | — |
| Automotive Qualification | AEC-Q100 Grade 1 and automotive compliant | AEC-Q100 Grade 1 |
| 패키지 | 8-pin TSSOP | 8-TSSOP |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | — |
| RoHS 상태 | Fully RoHS Compliant | RoHS3 compliant |
| Lead-Free Status | Totally Lead-Free | — |
| Halogen and Antimony | Free | — |
| Device Type | — | Dual differential voltage comparator |
| Number of Channels | — | 2 |
| Maximum Supply Voltage | — | 36 V |
| Input Offset Current | — | 5 nA |
| 출력 구성 | — | Open-collector (open-drain), requires external pull-up |
| 핀 수 | — | 8 pins |
| REACH Status | — | REACH compliant |
| Moisture Sensitivity Level | — | MSL Level 1 |
| Mold Compound | — | Green mold compound |
| PPAP Support | — | Supported |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |