LM2903VQPWRQ1 vs LM2903VQPWRG4 比較
詳細な並列比較: LM2903VQPWRQ1 メーカー: Texas Instruments および LM2903VQPWRG4 メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1 ✓ 生産中仕様比較
| パラメータ | LM2903VQPWRQ1 | LM2903VQPWRG4 |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Comparator Type | Dual general-purpose differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Configuration | Single supply or dual supplies | Single supply or dual supplies |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Minimum VCC Margin | At least 1.5 V above the lower supply | — |
| Supply Current Drain | 0.4 mA typical per comparator | 0.4 mA typical per comparator |
| 出力タイプ | Open-collector | Open collector |
| Common-Mode Input Range | Rail-to-rail | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| ESD Rating | 2 kV | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| パッケージ | 8-pin TSSOP | 8-TSSOP (PW) |
| 実装タイプ | Surface mount | Surface mount |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range by grade] | [DATA_NEEDED: operating temperature range] |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | [DATA_NEEDED: REACH compliance statement] | — |
| Shipping Format | Tape and reel | — |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Input Common-Mode Range | — | Rail-to-rail |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |