LM2903VQPWRQ1 vs LM2903VQPWRG4 비교
다음의 상세 나란히 비교: LM2903VQPWRQ1 제조: Texas Instruments 및 LM2903VQPWRG4 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM2903VQPWRQ1 - Dual 36V Automotive Comparator | Texas Instruments
LM2903VQPWRQ1 ✓ 활성사양 비교
| 파라미터 | LM2903VQPWRQ1 | LM2903VQPWRG4 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Dual general-purpose differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Configuration | Single supply or dual supplies | Single supply or dual supplies |
| Dual-Supply Total Voltage Range | 2 V to 36 V | — |
| Minimum VCC Margin | At least 1.5 V above the lower supply | — |
| Supply Current Drain | 0.4 mA typical per comparator | 0.4 mA typical per comparator |
| 출력 유형 | Open-collector | Open collector |
| Common-Mode Input Range | Rail-to-rail | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| ESD Rating | 2 kV | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| 패키지 | 8-pin TSSOP | 8-TSSOP (PW) |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range by grade] | [DATA_NEEDED: operating temperature range] |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance statement] | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | [DATA_NEEDED: REACH compliance statement] | — |
| Shipping Format | Tape and reel | — |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Input Common-Mode Range | — | Rail-to-rail |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |