MAX1081BCUP vs MAX1177CCUP+T 比較

詳細な並列比較: MAX1081BCUP メーカー: Analog Devices および MAX1177CCUP+T メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Maxim Integrated
MAX1177CCUP+T MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T ✓ 生産中

仕様比較

パラメータ MAX1081BCUP MAX1177CCUP+T
ブランド Analog Devices Maxim Integrated
カテゴリ ADC/DAC ADC/DAC
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $8.40 $7.40
分解能 10 bit 16 bits
Number of Input Channels 8 (single-ended) / 4 (differential, software-configurable) 1 (single-ended analog input)
サンプリングレート 400 ksps (external clock, MAX1081) / 300 ksps (internal clock) —
電源電圧 +2.7 V to +3.6 V (single supply, MAX1081) —
Supply Current (Normal Operation) 2.5 mA typical —
Supply Current (Full Power-Down) <= 10 uA (FULLPD mode) —
Internal Reference Voltage +2.5 V —
Analog Input Range 0 V to VREF (unipolar) or +/- VREF (bipolar) Bipolar (single-supply, true bipolar input per datasheet)
Architecture SAR (Successive Approximation Register) —
インターフェース SPI / QSPI / MICROWIRE-compatible serial —
Shutdown Pin Active-low SHDN —
Power Modes Normal, REDP, FASTPD, FULLPD (AutoShutdown at end of conversion) —
Integral Nonlinearity (INL) [DATA_NEEDED: INL] —
Differential Nonlinearity (DNL) [DATA_NEEDED: DNL] —
Signal-to-Noise + Distortion (SINAD) [DATA_NEEDED: SINAD] —
パッケージ 20-pin TSSOP —
動作温度範囲 0C to +70C (commercial, 'C' suffix) —
実装タイプ Surface Mount Surface Mount
RoHS ステータス Compliant (MAX1081BCUP+) —
Sample Rate — 135 ksps (max)
Conversion Architecture — SAR (Successive Approximation)
Supply Voltage (AVDD) — 4.2 V nominal (single supply)
Digital Interface — Parallel (byte-wide)
Internal Clock — Yes (factory-trimmed)
Automatic Power-Down — Yes (auto power-down between conversions)
Track-and-Hold — Yes (input T/H included)
Package Type — TSSOP-20 (MO-153AC, 4.40 mm body width)
ピン数 — 20
動作温度 — 0 C to +70 C (commercial grade)
Screening Level — Commercial

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼