MAX1081BCUP vs MAX1177CCUP+T 비교

다음의 상세 나란히 비교: MAX1081BCUP 제조: Analog Devices 및 MAX1177CCUP+T 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Maxim Integrated
MAX1177CCUP+T MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T ✓ 활성

사양 비교

파라미터 MAX1081BCUP MAX1177CCUP+T
브랜드 Analog Devices Maxim Integrated
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $8.40 $7.40
분해능 10 bit 16 bits
Number of Input Channels 8 (single-ended) / 4 (differential, software-configurable) 1 (single-ended analog input)
샘플링 속도 400 ksps (external clock, MAX1081) / 300 ksps (internal clock) —
공급 전압 +2.7 V to +3.6 V (single supply, MAX1081) —
Supply Current (Normal Operation) 2.5 mA typical —
Supply Current (Full Power-Down) <= 10 uA (FULLPD mode) —
Internal Reference Voltage +2.5 V —
Analog Input Range 0 V to VREF (unipolar) or +/- VREF (bipolar) Bipolar (single-supply, true bipolar input per datasheet)
Architecture SAR (Successive Approximation Register) —
인터페이스 SPI / QSPI / MICROWIRE-compatible serial —
Shutdown Pin Active-low SHDN —
Power Modes Normal, REDP, FASTPD, FULLPD (AutoShutdown at end of conversion) —
Integral Nonlinearity (INL) [DATA_NEEDED: INL] —
Differential Nonlinearity (DNL) [DATA_NEEDED: DNL] —
Signal-to-Noise + Distortion (SINAD) [DATA_NEEDED: SINAD] —
패키지 20-pin TSSOP —
동작 온도 범위 0C to +70C (commercial, 'C' suffix) —
실장 유형 Surface Mount Surface Mount
RoHS 상태 Compliant (MAX1081BCUP+) —
Sample Rate — 135 ksps (max)
Conversion Architecture — SAR (Successive Approximation)
Supply Voltage (AVDD) — 4.2 V nominal (single supply)
Digital Interface — Parallel (byte-wide)
Internal Clock — Yes (factory-trimmed)
Automatic Power-Down — Yes (auto power-down between conversions)
Track-and-Hold — Yes (input T/H included)
Package Type — TSSOP-20 (MO-153AC, 4.40 mm body width)
핀 수 — 20
동작 온도 — 0 C to +70 C (commercial grade)
Screening Level — Commercial

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청