MAX1177CCUP+T vs MAX1081BCUP 比較

詳細な並列比較: MAX1177CCUP+T メーカー: Maxim Integrated および MAX1081BCUP メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Maxim Integrated
MAX1177CCUP+T MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T ✓ 生産中

仕様比較

パラメータ MAX1177CCUP+T MAX1081BCUP
ブランド Maxim Integrated Analog Devices
カテゴリ ADC/DAC ADC/DAC
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $7.40 $8.40
分解能 16 bits 10 bit
Sample Rate 135 ksps (max) —
Conversion Architecture SAR (Successive Approximation) —
Number of Input Channels 1 (single-ended analog input) 8 (single-ended) / 4 (differential, software-configurable)
Analog Input Range Bipolar (single-supply, true bipolar input per datasheet) 0 V to VREF (unipolar) or +/- VREF (bipolar)
Supply Voltage (AVDD) 4.2 V nominal (single supply) —
Digital Interface Parallel (byte-wide) —
Internal Clock Yes (factory-trimmed) —
Automatic Power-Down Yes (auto power-down between conversions) —
Track-and-Hold Yes (input T/H included) —
Package Type TSSOP-20 (MO-153AC, 4.40 mm body width) —
ピン数 20 —
実装タイプ Surface Mount Surface Mount
動作温度 0 C to +70 C (commercial grade) —
Screening Level Commercial —
サンプリングレート — 400 ksps (external clock, MAX1081) / 300 ksps (internal clock)
電源電圧 — +2.7 V to +3.6 V (single supply, MAX1081)
Supply Current (Normal Operation) — 2.5 mA typical
Supply Current (Full Power-Down) — <= 10 uA (FULLPD mode)
Internal Reference Voltage — +2.5 V
Architecture — SAR (Successive Approximation Register)
インターフェース — SPI / QSPI / MICROWIRE-compatible serial
Shutdown Pin — Active-low SHDN
Power Modes — Normal, REDP, FASTPD, FULLPD (AutoShutdown at end of conversion)
Integral Nonlinearity (INL) — [DATA_NEEDED: INL]
Differential Nonlinearity (DNL) — [DATA_NEEDED: DNL]
Signal-to-Noise + Distortion (SINAD) — [DATA_NEEDED: SINAD]
パッケージ — 20-pin TSSOP
動作温度範囲 — 0C to +70C (commercial, 'C' suffix)
RoHS ステータス — Compliant (MAX1081BCUP+)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼