MAX1177CCUP+T vs MAX1081BCUP 비교

다음의 상세 나란히 비교: MAX1177CCUP+T 제조: Maxim Integrated 및 MAX1081BCUP 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Maxim Integrated
MAX1177CCUP+T MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T ✓ 활성

사양 비교

파라미터 MAX1177CCUP+T MAX1081BCUP
브랜드 Maxim Integrated Analog Devices
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $7.40 $8.40
분해능 16 bits 10 bit
Sample Rate 135 ksps (max) —
Conversion Architecture SAR (Successive Approximation) —
Number of Input Channels 1 (single-ended analog input) 8 (single-ended) / 4 (differential, software-configurable)
Analog Input Range Bipolar (single-supply, true bipolar input per datasheet) 0 V to VREF (unipolar) or +/- VREF (bipolar)
Supply Voltage (AVDD) 4.2 V nominal (single supply) —
Digital Interface Parallel (byte-wide) —
Internal Clock Yes (factory-trimmed) —
Automatic Power-Down Yes (auto power-down between conversions) —
Track-and-Hold Yes (input T/H included) —
Package Type TSSOP-20 (MO-153AC, 4.40 mm body width) —
핀 수 20 —
실장 유형 Surface Mount Surface Mount
동작 온도 0 C to +70 C (commercial grade) —
Screening Level Commercial —
샘플링 속도 — 400 ksps (external clock, MAX1081) / 300 ksps (internal clock)
공급 전압 — +2.7 V to +3.6 V (single supply, MAX1081)
Supply Current (Normal Operation) — 2.5 mA typical
Supply Current (Full Power-Down) — <= 10 uA (FULLPD mode)
Internal Reference Voltage — +2.5 V
Architecture — SAR (Successive Approximation Register)
인터페이스 — SPI / QSPI / MICROWIRE-compatible serial
Shutdown Pin — Active-low SHDN
Power Modes — Normal, REDP, FASTPD, FULLPD (AutoShutdown at end of conversion)
Integral Nonlinearity (INL) — [DATA_NEEDED: INL]
Differential Nonlinearity (DNL) — [DATA_NEEDED: DNL]
Signal-to-Noise + Distortion (SINAD) — [DATA_NEEDED: SINAD]
패키지 — 20-pin TSSOP
동작 온도 범위 — 0C to +70C (commercial, 'C' suffix)
RoHS 상태 — Compliant (MAX1081BCUP+)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청