MAX150AEWP+T vs MAX152CWP 比較

詳細な並列比較: MAX150AEWP+T メーカー: Maxim Integrated および MAX152CWP メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Maxim Integrated
MAX150AEWP+T MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T ✓ 生産中

仕様比較

パラメータ MAX150AEWP+T MAX152CWP
ブランド Maxim Integrated Maxim Integrated
カテゴリ ADC/DAC ADC/DAC
ライフサイクル状態 有効 Obsolete
在庫状況 In Stock In Stock
単価(USD) $5.78 $4.05
分解能 8 bit 8 bits
ADC Architecture Half-flash (two-step) with track-and-hold —
Number of Channels 1 single-ended input —
Conversion Time (typ) 1.34 us —
Maximum Sample Rate approx. 500 ksps —
Analog Input Range 0 V to +5 V (unipolar) —
基準電圧 Internal 2.5 V (external overdrive supported) Internal or external (ratiometric mode available, VREF = VCC)
Analog Supply (AVCC) +5 V nominal —
Digital Supply (DVCC) +5 V nominal —
Typical Power Dissipation 35 mW (analog) + 40 mW (digital) —
Output Interface Parallel 8-bit, three-state, microprocessor-compatible —
Input Track-and-Hold Acquisition approx. 100 ns to 0.01% accuracy —
動作温度範囲 -40 C to +85 C 0C to +70C (commercial)
パッケージ 20-pin Wide-Body SOIC (EWP) 20-pin SOIC wide-body (WP), 7.5 mm body width
実装タイプ Surface Mount (Tape & Reel) Surface Mount
RoHS ステータス Compliant [DATA_NEEDED: RoHS status - check manufacturer declaration]
Number of Input Channels — 1 (single-ended analog input; internal 8:1 multiplexer available on related parts)
Conversion Architecture — Half-flash (sub-ranging flash)
Conversion Time — 1.8 us
Throughput / Sample Rate — 400 ksps
入力電圧範囲 — 0 V to VREF
Supply Voltage (Single Supply) — +2.7 V to +3.6 V (+3V nominal)
Operating Current (Active) — 1.5 mA typical
Power-Down Current — 1 uA typical
Wake-Up Time from Power-Down — 900 ns
Full-Power Analog Input Bandwidth — 300 kHz
Internal Track/Hold — Yes (integrated)
インターフェース — Microprocessor-compatible parallel (8-bit data bus)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼