MAX150AEWP+T vs MAX152CWP 비교

다음의 상세 나란히 비교: MAX150AEWP+T 제조: Maxim Integrated 및 MAX152CWP 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Maxim Integrated
MAX150AEWP+T MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T - 8-Bit 500ns Flash ADC with T/H | Maxim Integrated

MAX150AEWP+T ✓ 활성

사양 비교

파라미터 MAX150AEWP+T MAX152CWP
브랜드 Maxim Integrated Maxim Integrated
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 Obsolete
재고 상태 In Stock In Stock
단가 (USD) $5.78 $4.05
분해능 8 bit 8 bits
ADC Architecture Half-flash (two-step) with track-and-hold —
Number of Channels 1 single-ended input —
Conversion Time (typ) 1.34 us —
Maximum Sample Rate approx. 500 ksps —
Analog Input Range 0 V to +5 V (unipolar) —
기준 전압 Internal 2.5 V (external overdrive supported) Internal or external (ratiometric mode available, VREF = VCC)
Analog Supply (AVCC) +5 V nominal —
Digital Supply (DVCC) +5 V nominal —
Typical Power Dissipation 35 mW (analog) + 40 mW (digital) —
Output Interface Parallel 8-bit, three-state, microprocessor-compatible —
Input Track-and-Hold Acquisition approx. 100 ns to 0.01% accuracy —
동작 온도 범위 -40 C to +85 C 0C to +70C (commercial)
패키지 20-pin Wide-Body SOIC (EWP) 20-pin SOIC wide-body (WP), 7.5 mm body width
실장 유형 Surface Mount (Tape & Reel) Surface Mount
RoHS 상태 Compliant [DATA_NEEDED: RoHS status - check manufacturer declaration]
Number of Input Channels — 1 (single-ended analog input; internal 8:1 multiplexer available on related parts)
Conversion Architecture — Half-flash (sub-ranging flash)
Conversion Time — 1.8 us
Throughput / Sample Rate — 400 ksps
입력 전압 범위 — 0 V to VREF
Supply Voltage (Single Supply) — +2.7 V to +3.6 V (+3V nominal)
Operating Current (Active) — 1.5 mA typical
Power-Down Current — 1 uA typical
Wake-Up Time from Power-Down — 900 ns
Full-Power Analog Input Bandwidth — 300 kHz
Internal Track/Hold — Yes (integrated)
인터페이스 — Microprocessor-compatible parallel (8-bit data bus)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청