MAX3485ESA+T vs MAX3485ECSA+T 比較
詳細な並列比較: MAX3485ESA+T メーカー: Analog Devices および MAX3485ECSA+T メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECSA+T ✓ 生産中仕様比較
| パラメータ | MAX3485ESA+T | MAX3485ECSA+T |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 half-duplex transceiver |
| 電源電圧 | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| パッケージ | 8-SOIC | 8-pin NSOIC (SOIC-8) |
| Package Dimensions | 3.90 mm width | — |
| 実装タイプ | Surface mount | Surface mount |
| Ordering Package | Tape and reel | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Supply Voltage Range | — | 3 V to 3.6 V |
| ESD Protection (Bus Pins) | — | +/-15 kV |
| Driver / Receiver Count | — | 1 driver, 1 receiver |
| Duplex | — | Half-duplex |
| Driver Output Type | — | Slew-rate-limited differential |
| Operating Supply Range | — | 3.3 V powered, single supply |
| RoHS ステータス | — | RoHS3 compliant |
| Lead-Free Status | — | Lead free |
| Driver Protection | — | Short-circuit current limit and thermal shutdown |
| ESD Rating Reference | — | +/-15 kV ESD-protected bus pins |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Unit Load / Max Nodes | — | [DATA_NEEDED: unit load and maximum node count] |
| Data Rate of Alternative MAX3485CSA+ | — | 10 Mbps |