MAX3488EEPA+ vs MAX3488CPA+ 比較
詳細な並列比較: MAX3488EEPA+ メーカー: Analog Devices および MAX3488CPA+ メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX3488EEPA+ | MAX3488CPA+ |
|---|---|---|
| ブランド | Analog Devices | Maxim Integrated |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 電源電圧 | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating] |
| Interface Standards | RS-422 and RS-485 | RS-485 and RS-422 |
| Transceiver Count | 1 per device | — |
| Driver Count | 1 per device | 1 |
| Receiver Count | 1 per device | 1 |
| Driver Output Type | Slew-rate-limited true differential driver | — |
| ピン数 | 8 pins | — |
| パッケージ | 8-pin PDIP | 8-pin PDIP |
| 実装タイプ | Through-hole | Through-hole |
| Production Status | PRODUCTION | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| 電源電流 | [DATA_NEEDED: supply current] | — |
| 静止電流 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Driver Disable Time | [DATA_NEEDED: driver disable time] | — |
| Receiver Enable Time | [DATA_NEEDED: receiver enable time] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Product Type | — | RS-485/RS-422 transceiver |
| Slew Rate | — | Slew-rate limited |
| Logic Compatibility | — | +5 V logic interoperable |
| 動作温度 | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Enable Control | — | [DATA_NEEDED: enable-control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output logic] |