MAX3488EEPA+ vs MAX3488CPA+ 비교
다음의 상세 나란히 비교: MAX3488EEPA+ 제조: Analog Devices 및 MAX3488CPA+ 제조: Maxim Integrated. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MAX3488EEPA+ | MAX3488CPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Maxim Integrated |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 공급 전압 | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating] |
| Interface Standards | RS-422 and RS-485 | RS-485 and RS-422 |
| Transceiver Count | 1 per device | — |
| Driver Count | 1 per device | 1 |
| Receiver Count | 1 per device | 1 |
| Driver Output Type | Slew-rate-limited true differential driver | — |
| 핀 수 | 8 pins | — |
| 패키지 | 8-pin PDIP | 8-pin PDIP |
| 실장 유형 | Through-hole | Through-hole |
| Production Status | PRODUCTION | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Driver Disable Time | [DATA_NEEDED: driver disable time] | — |
| Receiver Enable Time | [DATA_NEEDED: receiver enable time] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Product Type | — | RS-485/RS-422 transceiver |
| Slew Rate | — | Slew-rate limited |
| Logic Compatibility | — | +5 V logic interoperable |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Enable Control | — | [DATA_NEEDED: enable-control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output logic] |