MAX485CSA+ vs MAX485EESA+ 比較

詳細な並列比較: MAX485CSA+ メーカー: Analog Devices および MAX485EESA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ 生産中

仕様比較

パラメータ MAX485CSA+ MAX485EESA+
ブランド Analog Devices Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Transceiver Configuration 1 driver and 1 receiver —
Communication Standards RS-485 and RS-422 —
Duplex Mode Half-duplex —
Maximum Data Rate 2.5Mbps —
Driver Slew Rate Unlimited for the MAX485 family Limited (low-EMI)
Device Type Low-power differential transceiver —
パッケージ 8-pin SOIC —
ピン数 8 pins —
実装タイプ Surface mount Surface Mount
電源電圧 [DATA_NEEDED: supply voltage range] —
電源電流 [DATA_NEEDED: unloaded and loaded supply current] —
動作温度範囲 [DATA_NEEDED: MAX485CSA operating temperature range] -40 °C to +85 °C
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Differential Input Sensitivity [DATA_NEEDED: receiver differential input sensitivity] —
Driver Output Current [DATA_NEEDED: driver output current] —
Short-Circuit Protection [DATA_NEEDED: driver short-circuit protection duration] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — RS-485/RS-422 Transceiver
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
データレート — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
パッケージ / ケース — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
MSLレベル — 1 (Unlimited)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼