MAX485CSA+ vs MAX485EESA+ So sánh

So sánh chi tiết song song của MAX485CSA+ bằng Analog Devices và MAX485EESA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ Hoạt động
Analog Devices
MAX485EESA+ MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX485CSA+ MAX485EESA+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Transceiver Configuration 1 driver and 1 receiver —
Communication Standards RS-485 and RS-422 —
Duplex Mode Half-duplex —
Maximum Data Rate 2.5Mbps —
Driver Slew Rate Unlimited for the MAX485 family Limited (low-EMI)
Device Type Low-power differential transceiver —
Hộp 8-pin SOIC —
Số chân 8 pins —
Kiểu lắp đặt Surface mount Surface Mount
Điện áp cung cấp [DATA_NEEDED: supply voltage range] —
Điện áp cung cấp [DATA_NEEDED: unloaded and loaded supply current] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: MAX485CSA operating temperature range] -40 °C to +85 °C
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Differential Input Sensitivity [DATA_NEEDED: receiver differential input sensitivity] —
Driver Output Current [DATA_NEEDED: driver output current] —
Short-Circuit Protection [DATA_NEEDED: driver short-circuit protection duration] —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Product Type — RS-485/RS-422 Transceiver
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
Tốc độ dữ liệu — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
Hộp / Vỏ — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
Cấp MSL — 1 (Unlimited)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá