MAX485EESA+ vs SN75176ADR 比較
詳細な並列比較: MAX485EESA+ メーカー: Analog Devices および SN75176ADR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments
SN75176ADR ✓ 生産中仕様比較
| パラメータ | MAX485EESA+ | SN75176ADR |
|---|---|---|
| ブランド | Analog Devices | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 Transceiver | Differential bus transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| データレート | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| 動作温度範囲 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| パッケージ / ケース | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| 実装タイプ | Surface Mount | Surface Mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSLレベル | 1 (Unlimited) | — |
| Supported Interface | — | RS-422 and RS-485 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| パッケージ | — | 8-pin SOIC |
| ピン数 | — | 8 pins |
| Communication Mode | — | Bidirectional |
| Bus Topology | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state output |
| Receiver Output State | — | 3-state output |
| Noise Environment | — | Designed for long bus lines in noisy environments |
| ANSI Standard | — | ANSI Standard EIA/TIA-422-B |
| ITU Recommendation | — | ITU Recommendation V.11 |
| Unit Price at Quantity 1 | — | USD 0.4602 as of 2026-10-29 |
| RoHS ステータス | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |