MAX485EESA+ vs SN75176ADR 比較
詳細並排比較 MAX485EESA+ 由 Analog Devices 與 SN75176ADR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
SN75176ADR - RS-422/RS-485 Differential Bus Transceiver | Texas Instruments
SN75176ADR ✓ 啟用中規格比較
| 參數 | MAX485EESA+ | SN75176ADR |
|---|---|---|
| 品牌 | Analog Devices | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 Transceiver | Differential bus transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| 資料速率 | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| 工作溫度範圍 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| 封裝 / 外殼 | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| 安裝類型 | Surface Mount | Surface Mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSL 等級 | 1 (Unlimited) | — |
| Supported Interface | — | RS-422 and RS-485 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| 封裝 | — | 8-pin SOIC |
| 腳位數 | — | 8 pins |
| Communication Mode | — | Bidirectional |
| Bus Topology | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state output |
| Receiver Output State | — | 3-state output |
| Noise Environment | — | Designed for long bus lines in noisy environments |
| ANSI Standard | — | ANSI Standard EIA/TIA-422-B |
| ITU Recommendation | — | ITU Recommendation V.11 |
| Unit Price at Quantity 1 | — | USD 0.4602 as of 2026-10-29 |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |