MMA6261QR2 vs MMA6233QR2 比較
詳細な並列比較: MMA6261QR2 メーカー: NXP Semiconductors および MMA6233QR2 メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 Obsolete仕様比較
| パラメータ | MMA6261QR2 | MMA6233QR2 |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Motion Sensors | Motion Sensors |
| ライフサイクル状態 | Obsolete | Obsolete |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $3.85 | $4.77 |
| センサタイプ | Accelerometer, dual-axis (X, Y) | Accelerometer, Dual-Axis (X, Y) |
| Sensing Technology | Capacitive MEMS | — |
| Acceleration Range | ±1.5 g | — |
| Number of Axes | 2 (X, Y) | — |
| 出力タイプ | Analog voltage, ratiometric | Analog, ratiometric |
| Bandwidth | 300 Hz | 900 Hz (maximum) |
| Supply Voltage (VDD) | 2.7 V to 3.6 V | 3.0 V to 5.25 V |
| 電源電流 | 1.5 mA (typical) | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Sensitivity | factory-set, ratiometric | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Zero-g Offset | factory-set | — |
| Filter | 1-pole low-pass, factory-set | — |
| Self-Test | Yes (per axis) | Yes (active-high logic input) |
| 動作温度 | -20 C to +85 C | -20C to +85C |
| パッケージ | 16-QFN-EP (6x6 mm) HQCCN | 16-pin QFN-EP (6x6 mm) |
| 実装タイプ | Surface Mount | Surface Mount |
| RoHS ステータス | RoHS Compliant (contains lead, lead-free terminal finish) | Compliant |
| ピン数 | 16 | — |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| ノイズ密度 | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| MSLレベル | — | [DATA_NEEDED: MSL rating] |