MMA6261QR2 vs MMA6233QR2 Comparaison
Comparaison détaillée côte à côte de MMA6261QR2 par NXP Semiconductors et MMA6233QR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoleteComparaison des spécifications
| Paramètre | MMA6261QR2 | MMA6233QR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,85 | $4,77 |
| Type de capteur | Accelerometer, dual-axis (X, Y) | Accelerometer, Dual-Axis (X, Y) |
| Sensing Technology | Capacitive MEMS | — |
| Acceleration Range | ±1.5 g | — |
| Number of Axes | 2 (X, Y) | — |
| Type de sortie | Analog voltage, ratiometric | Analog, ratiometric |
| Bandwidth | 300 Hz | 900 Hz (maximum) |
| Supply Voltage (VDD) | 2.7 V to 3.6 V | 3.0 V to 5.25 V |
| Courant d'alimentation | 1.5 mA (typical) | 2.5 mA (typical, [DATA_NEEDED: max]) |
| Sensitivity | factory-set, ratiometric | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) |
| Zero-g Offset | factory-set | — |
| Filter | 1-pole low-pass, factory-set | — |
| Self-Test | Yes (per axis) | Yes (active-high logic input) |
| Température de fonctionnement | -20 C to +85 C | -20C to +85C |
| Boîtier | 16-QFN-EP (6x6 mm) HQCCN | 16-pin QFN-EP (6x6 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | RoHS Compliant (contains lead, lead-free terminal finish) | Compliant |
| Nombre de broches | 16 | — |
| Full-Scale Range | — | ±10g (±6g via g-select) |
| Output Voltage at 0g | — | VDD/2 |
| Densité de bruit | — | [DATA_NEEDED: noise density] |
| Nonlinearity | — | [DATA_NEEDED: nonlinearity %FS] |
| g-Select Input | — | Yes (±10g or ±6g selection) |
| Filter Type | — | 1-pole low-pass (factory-set cut-off) |
| Lead-Free Status | — | Contains Lead (NXP datasheet note) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |