MPXV2102GP vs MPX2010GP 比較
詳細な並列比較: MPXV2102GP メーカー: NXP Semiconductors および MPX2010GP メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ 生産中仕様比較
| パラメータ | MPXV2102GP | MPX2010GP |
|---|---|---|
| ブランド | NXP Semiconductors | STMicroelectronics |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | ラストバイ | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $5.60 | $7.20 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 100 kPa (0 to 14.5 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Supply Voltage (Excitation) | 10 V DC typical | 10 V DC typical (max per datasheet) |
| Full-Scale Output (Typical) | 40 mV at 10 V | — |
| Sensitivity (Typical) | 0.4 mV/kPa | — |
| Offset (Trimmed) | ±1 mV (after laser trim) | — |
| Linearity | ±0.25% of span (typ) | [DATA_NEEDED: linearity %FS] |
| 動作温度 | -40 °C to +125 °C | — |
| Storage Temperature | [DATA_NEEDED: storage temperature] | — |
| Input Resistance (Bridge) | 400 Ω typical | — |
| Output Resistance (Bridge) | [DATA_NEEDED: output resistance] | — |
| Response Time | [DATA_NEEDED: response time] | 1 ms typical |
| パッケージ / ケース | 8-SMD, Gull Wing, Side Port (SOP 8, case 1735) | 4-SIP Module (Case 344B-01) |
| Port Size | 0.13" (3.17 mm) Tube | — |
| 実装タイプ | Surface Mount | Through-Hole (SIP) |
| RoHS ステータス | Compliant | Compliant |
| Technology | Piezoresistive (silicon strain gauge Wheatstone bridge) | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Sensitivity (Full-Scale Span) | — | 25 mV typical at 10 V excitation |
| 出力電圧範囲 | — | 0 mV to 25 mV (10 V supply) |
| Offset (Zero Pressure) | — | 0 mV nominal |
| 電源電流 | — | 6 mA DC typical |
| Temperature Compensation | — | On-chip, calibrated |
| 動作温度範囲 | — | -40 C to +125 C |
| Storage Temperature Range | — | -40 C to +125 C |
| Port Style | — | Male, 0.19 inch (4.93 mm) tube, vented gauge |
| Media Compatibility | — | Dry gases (silicone gel isolation) |