MPXV2102GP vs MPX2010GP 비교
다음의 상세 나란히 비교: MPXV2102GP 제조: NXP Semiconductors 및 MPX2010GP 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ 활성사양 비교
| 파라미터 | MPXV2102GP | MPX2010GP |
|---|---|---|
| 브랜드 | NXP Semiconductors | STMicroelectronics |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 최종 구매 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.60 | $7.20 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 100 kPa (0 to 14.5 PSI) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Supply Voltage (Excitation) | 10 V DC typical | 10 V DC typical (max per datasheet) |
| Full-Scale Output (Typical) | 40 mV at 10 V | — |
| Sensitivity (Typical) | 0.4 mV/kPa | — |
| Offset (Trimmed) | ±1 mV (after laser trim) | — |
| Linearity | ±0.25% of span (typ) | [DATA_NEEDED: linearity %FS] |
| 동작 온도 | -40 °C to +125 °C | — |
| Storage Temperature | [DATA_NEEDED: storage temperature] | — |
| Input Resistance (Bridge) | 400 Ω typical | — |
| Output Resistance (Bridge) | [DATA_NEEDED: output resistance] | — |
| Response Time | [DATA_NEEDED: response time] | 1 ms typical |
| 패키지 / 케이스 | 8-SMD, Gull Wing, Side Port (SOP 8, case 1735) | 4-SIP Module (Case 344B-01) |
| Port Size | 0.13" (3.17 mm) Tube | — |
| 실장 유형 | Surface Mount | Through-Hole (SIP) |
| RoHS 상태 | Compliant | Compliant |
| Technology | Piezoresistive (silicon strain gauge Wheatstone bridge) | — |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Sensitivity (Full-Scale Span) | — | 25 mV typical at 10 V excitation |
| 출력 전압 범위 | — | 0 mV to 25 mV (10 V supply) |
| Offset (Zero Pressure) | — | 0 mV nominal |
| 공급 전류 | — | 6 mA DC typical |
| Temperature Compensation | — | On-chip, calibrated |
| 동작 온도 범위 | — | -40 C to +125 C |
| Storage Temperature Range | — | -40 C to +125 C |
| Port Style | — | Male, 0.19 inch (4.93 mm) tube, vented gauge |
| Media Compatibility | — | Dry gases (silicone gel isolation) |