NE5534IP vs OPA627BP 比較
詳細な並列比較: NE5534IP メーカー: Texas Instruments および OPA627BP メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | NE5534IP | OPA627BP |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Single low-noise operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typ | — |
| Maximum Supply Voltage | 30 V | — |
| Equivalent Input Noise Voltage Density | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typ | — |
| Common-Mode Rejection Ratio | 100 dB typ | — |
| Slew Rate | 13 V/µs typ | 55 V/us |
| Peak-to-Peak Output Voltage Swing | 32 V typ with VCC = ±18 V | — |
| Input Offset Current | 500 nA | — |
| Maximum Input Offset Voltage | 5000 µV | — |
| 動作温度範囲 | 0°C to 70°C | [DATA_NEEDED: operating temperature range] |
| パッケージ | 8-pin PDIP | 8-Pin PDIP (P) |
| 実装タイプ | Through-hole | Through Hole |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS status] |
| Input Offset Voltage | [DATA_NEEDED: typical and maximum input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: typical and maximum input bias current] | — |
| 電源電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: quiescent supply current] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing by supply condition] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Amplifier Type | — | Precision High-Speed Difet Operational Amplifier |
| Number of Channels | — | 1 |
| Gain Bandwidth Product | — | 16 MHz |
| Offset Drift | — | 0.8 uV/C max |
| Supply Voltage Range | — | ±4.5 V to ±18 V (9 V to 36 V total) |
| Input Type | — | JFET (Difet process) |
| Input Offset Voltage (B grade) | — | [DATA_NEEDED: input offset voltage max] |
| Input Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Product Family | — | OPA6x7 (OPA627 / OPA637) |
| Output Current | — | [DATA_NEEDED: output current] |