NE5534IP vs OPA627BP 비교
다음의 상세 나란히 비교: NE5534IP 제조: Texas Instruments 및 OPA627BP 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | NE5534IP | OPA627BP |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Single low-noise operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typ | — |
| Maximum Supply Voltage | 30 V | — |
| Equivalent Input Noise Voltage Density | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typ | — |
| Common-Mode Rejection Ratio | 100 dB typ | — |
| Slew Rate | 13 V/µs typ | 55 V/us |
| Peak-to-Peak Output Voltage Swing | 32 V typ with VCC = ±18 V | — |
| Input Offset Current | 500 nA | — |
| Maximum Input Offset Voltage | 5000 µV | — |
| 동작 온도 범위 | 0°C to 70°C | [DATA_NEEDED: operating temperature range] |
| 패키지 | 8-pin PDIP | 8-Pin PDIP (P) |
| 실장 유형 | Through-hole | Through Hole |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Input Offset Voltage | [DATA_NEEDED: typical and maximum input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: typical and maximum input bias current] | — |
| 공급 전류 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: quiescent supply current] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing by supply condition] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Amplifier Type | — | Precision High-Speed Difet Operational Amplifier |
| Number of Channels | — | 1 |
| Gain Bandwidth Product | — | 16 MHz |
| Offset Drift | — | 0.8 uV/C max |
| Supply Voltage Range | — | ±4.5 V to ±18 V (9 V to 36 V total) |
| Input Type | — | JFET (Difet process) |
| Input Offset Voltage (B grade) | — | [DATA_NEEDED: input offset voltage max] |
| Input Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Product Family | — | OPA6x7 (OPA627 / OPA637) |
| Output Current | — | [DATA_NEEDED: output current] |