PCA9538DWR vs TCA9538PWR 比較
詳細な並列比較: PCA9538DWR メーカー: Texas Instruments および TCA9538PWR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
PCA9538DWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
PCA9538DWR ✓ 生産中仕様比較
| パラメータ | PCA9538DWR | TCA9538PWR |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Number of I/O Ports | 8 ports | — |
| I/O Port Resolution | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 1.65 V to 5.5 V |
| インターフェースタイプ | I2C and SMBus | — |
| Maximum I2C Bus Frequency | 400 kHz | — |
| Interrupt Output | 1 active-low open-drain output | Yes |
| Reset Function | 1 reset input | — |
| Configuration Registers | 8-port input/output configuration | Yes |
| 動作温度範囲 | -40 °C to +85 °C | -40 °C to 125 °C |
| Package Type | 16-pin SOIC (DW) | — |
| Package Body Width | 300 mil | — |
| 実装タイプ | Surface mount | Surface mount |
| Device Technology | CMOS | — |
| Logic Low-Level Input Voltage | [DATA_NEEDED: VIL maximum at each supported supply voltage] | — |
| Logic High-Level Input Voltage | [DATA_NEEDED: VIH minimum at each supported supply voltage] | — |
| Standby Supply Current | [DATA_NEEDED: standby current] | — |
| Operating Supply Current | [DATA_NEEDED: operating current] | — |
| RoHS ステータス | unknown | Compliant |
| Product Type | — | 8-bit I2C/SMBus I/O expander |
| Number of I/O Lines | — | 8 lines |
| Maximum I2C Clock Frequency | — | 400 kHz |
| Supported I2C Modes | — | 100 kHz Standard-mode and 400 kHz Fast-mode |
| Interface Protocol | — | I2C and SMBus |
| Reset Register | — | Yes |
| Hardware Address Inputs | — | 2 address inputs |
| Maximum Devices per I2C Bus | — | 4 devices |
| パッケージ | — | 16-pin TSSOP |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| 静止電流 | — | [DATA_NEEDED: quiescent current] |
| I/O Output Current | — | [DATA_NEEDED: per-pin output current] |