PCA9538DWR vs TCA9538PWR 비교
다음의 상세 나란히 비교: PCA9538DWR 제조: Texas Instruments 및 TCA9538PWR 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
PCA9538DWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
PCA9538DWR ✓ 활성사양 비교
| 파라미터 | PCA9538DWR | TCA9538PWR |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of I/O Ports | 8 ports | — |
| I/O Port Resolution | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 1.65 V to 5.5 V |
| 인터페이스 유형 | I2C and SMBus | — |
| Maximum I2C Bus Frequency | 400 kHz | — |
| Interrupt Output | 1 active-low open-drain output | Yes |
| Reset Function | 1 reset input | — |
| Configuration Registers | 8-port input/output configuration | Yes |
| 동작 온도 범위 | -40 °C to +85 °C | -40 °C to 125 °C |
| Package Type | 16-pin SOIC (DW) | — |
| Package Body Width | 300 mil | — |
| 실장 유형 | Surface mount | Surface mount |
| Device Technology | CMOS | — |
| Logic Low-Level Input Voltage | [DATA_NEEDED: VIL maximum at each supported supply voltage] | — |
| Logic High-Level Input Voltage | [DATA_NEEDED: VIH minimum at each supported supply voltage] | — |
| Standby Supply Current | [DATA_NEEDED: standby current] | — |
| Operating Supply Current | [DATA_NEEDED: operating current] | — |
| RoHS 상태 | unknown | Compliant |
| Product Type | — | 8-bit I2C/SMBus I/O expander |
| Number of I/O Lines | — | 8 lines |
| Maximum I2C Clock Frequency | — | 400 kHz |
| Supported I2C Modes | — | 100 kHz Standard-mode and 400 kHz Fast-mode |
| Interface Protocol | — | I2C and SMBus |
| Reset Register | — | Yes |
| Hardware Address Inputs | — | 2 address inputs |
| Maximum Devices per I2C Bus | — | 4 devices |
| 패키지 | — | 16-pin TSSOP |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| I/O Output Current | — | [DATA_NEEDED: per-pin output current] |