SN65HVD05D vs SN65HVD52D 比較
詳細な並列比較: SN65HVD05D メーカー: Texas Instruments および SN65HVD52D メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ 生産中仕様比較
| パラメータ | SN65HVD05D | SN65HVD52D |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Half-duplex RS-422/RS-485 transceiver | RS-485 / RS-422 full-duplex transceiver |
| Driver and Receiver Count | 1 differential driver and 1 differential receiver | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Minimum Differential Output Voltage | 2.5 V into a 54-ohm load | — |
| Driver Output State | 3-state | — |
| Receiver Failsafe Behavior | Open-circuit, short-circuit, and idle-bus failsafe | — |
| Unit Load Option | 1/8 unit load | — |
| Maximum Node Count | Up to 256 nodes on the bus | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | Exceeds 15 kV HBM |
| Driver Output Slew Rate | Controlled | — |
| Communication Mode | Half-duplex | — |
| Standards Compatibility | ANSI TIA/EIA-485-A and ISO 8482E | — |
| パッケージ | 8-pin SOIC (D) | 8-pin SOIC (D) |
| 実装タイプ | Surface mount | Surface mount |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Driver / Receiver Count | — | 1 driver and 1 receiver |
| データレート | — | 1 Mbps |
| 電源電圧 | — | 5 V |
| Maximum Supply Voltage | — | 5.5 V |
| 動作温度 | — | -40 C to +85 C |
| Driver Configuration | — | Full-duplex |
| Bus Standard | — | RS-485 and RS-422 |
| Unit Load | — | 1/8 unit-load option |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Standby Current | — | 1 uA |
| Maximum Transmit Delay | — | 230 ns |
| Maximum Supply Current | — | 8 mA |
| Interface Standard | — | EIA-485-A |