SN65HVD05D vs SN65HVD52D So sánh

So sánh chi tiết song song của SN65HVD05D bằng Texas Instruments và SN65HVD52D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ Hoạt động
Texas Instruments
SN65HVD52D SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD52D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD05D SN65HVD52D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-422/RS-485 transceiver RS-485 / RS-422 full-duplex transceiver
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Supply Voltage Range 4.5 V to 5.5 V —
Minimum Differential Output Voltage 2.5 V into a 54-ohm load —
Driver Output State 3-state —
Receiver Failsafe Behavior Open-circuit, short-circuit, and idle-bus failsafe —
Unit Load Option 1/8 unit load —
Maximum Node Count Up to 256 nodes on the bus —
Bus-Pin ESD Protection Exceeds 16 kV HBM Exceeds 15 kV HBM
Driver Output Slew Rate Controlled —
Communication Mode Half-duplex —
Standards Compatibility ANSI TIA/EIA-485-A and ISO 8482E —
Hộp 8-pin SOIC (D) 8-pin SOIC (D)
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Driver / Receiver Count — 1 driver and 1 receiver
Tốc độ dữ liệu — 1 Mbps
Điện áp cung cấp — 5 V
Maximum Supply Voltage — 5.5 V
Nhiệt độ hoạt động — -40 C to +85 C
Driver Configuration — Full-duplex
Bus Standard — RS-485 and RS-422
Unit Load — 1/8 unit-load option
Maximum Bus Nodes — Up to 256 nodes
Standby Current — 1 uA
Maximum Transmit Delay — 230 ns
Maximum Supply Current — 8 mA
Interface Standard — EIA-485-A

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá