SN65HVD230DR vs SN65HVD232DR 比較
詳細な並列比較: SN65HVD230DR メーカー: Texas Instruments および SN65HVD232DR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ 生産中
仕様比較
| パラメータ | SN65HVD230DR | SN65HVD232DR |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $0.94 | $0.00 |
| Product Type | CAN Bus Transceiver | Single-channel CAN transceiver |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | CANbus (ISO 11898-2) | — |
| 電源電圧 | 3 V to 3.6 V (3.3 V nominal) | 3.3 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| 動作温度 | -40C to +85C | -40°C to +85°C |
| パッケージ | 8-SOIC (D) | 8-pin SOIC |
| 実装タイプ | Surface Mount | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS status for this specific orderable part] |
| RS Pin Function | Slew-rate control via external resistor | — |
| CAN Data Rate | — | Up to 1 Mbps |
| CAN Standard Compatibility | — | ISO 11898-2 high-speed CAN physical layer |
| Bus Nodes | — | Up to 120 nodes |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Supply Voltage Range | — | [DATA_NEEDED: recommended operating supply-voltage range] |
| Logic Input Voltage | — | [DATA_NEEDED: CAN controller-compatible logic voltage] |
| Differential Output Voltage | — | Comparable between the SN65HVD23x family variants; exact value not stated in verified search data |
| Dominant Common-Mode Output | — | Lower than 5V supplied transceivers by a few hundred millivolts |
| Recessive Common-Mode Output Bias | — | Same as the referenced 5V supplied transceiver family |
| Receiver Input Impedance | — | High; supports up to 120 nodes on a bus |
| Driver Output Transition Time | — | Controlled for improved signal quality |
| Unpowered Node Behavior | — | Does not disturb the CAN bus |
| Channel Count | — | 1 CAN channel |
| REACH Status | — | [DATA_NEEDED: REACH status for this specific orderable part] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |