SN65HVD30D vs SN65HVD78D 比較
詳細な並列比較: SN65HVD30D メーカー: Texas Instruments および SN65HVD78D メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD30D ✓ 生産中仕様比較
| パラメータ | SN65HVD30D | SN65HVD78D |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | USB Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | 3.3 V full-duplex RS-485 driver and receiver | 3.3 V half-duplex RS-485 transceiver |
| 電源電圧 | 3.3 V | — |
| Supported Standards | RS-422 and RS-485 | — |
| Bus Length | up to 1500 m | — |
| Duplex Mode | Full-duplex | Half-duplex |
| Driver Output | 3-state differential line driver | — |
| Receiver Input | Differential-input line receiver | — |
| Logic Interface | Separate driver and receiver input and output pins | — |
| パッケージ | 8-pin SOIC (D) | 8-pin SOIC |
| 動作温度 | -40°C to 85°C | — |
| 実装タイプ | Surface mount | Surface mount |
| データレート | [DATA_NEEDED: maximum signaling rate] | — |
| Driver Differential Output Voltage | [DATA_NEEDED: driver differential output voltage] | — |
| Receiver Differential Input Threshold | [DATA_NEEDED: receiver differential input threshold] | — |
| 電源電流 | [DATA_NEEDED: operating supply current] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Moisture Sensitivity Level | [DATA_NEEDED: moisture sensitivity level] | — |
| 熱抵抗 | [DATA_NEEDED: junction-to-ambient thermal resistance] | — |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Bus Standard | — | RS-485 |
| 動作温度範囲 | — | -40°C to +125°C |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |