SN65HVD30D vs SN65HVD78D So sánh

So sánh chi tiết song song của SN65HVD30D bằng Texas Instruments và SN65HVD78D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
SN65HVD30D SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD30D - 3.3V Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD30D ✓ Hoạt động
Texas Instruments
SN65HVD78D SN65HVD78D - 3.3V 50Mbps Half-Duplex RS-485 | TI

SN65HVD78D - 3.3V 50Mbps Half-Duplex RS-485 | TI

SN65HVD78D ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SN65HVD30D SN65HVD78D
Thương hiệu Texas Instruments Texas Instruments
Danh mục Interface ICs USB Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 3.3 V full-duplex RS-485 driver and receiver 3.3 V half-duplex RS-485 transceiver
Điện áp cung cấp 3.3 V —
Supported Standards RS-422 and RS-485 —
Bus Length up to 1500 m —
Duplex Mode Full-duplex Half-duplex
Driver Output 3-state differential line driver —
Receiver Input Differential-input line receiver —
Logic Interface Separate driver and receiver input and output pins —
Hộp 8-pin SOIC (D) 8-pin SOIC
Nhiệt độ hoạt động -40°C to 85°C —
Kiểu lắp đặt Surface mount Surface mount
Tốc độ dữ liệu [DATA_NEEDED: maximum signaling rate] —
Driver Differential Output Voltage [DATA_NEEDED: driver differential output voltage] —
Receiver Differential Input Threshold [DATA_NEEDED: receiver differential input threshold] —
Điện áp cung cấp [DATA_NEEDED: operating supply current] —
Power-Supply Rejection Ratio [DATA_NEEDED: power-supply rejection ratio] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: AEC-Q100 qualification status]
Moisture Sensitivity Level [DATA_NEEDED: moisture sensitivity level] —
Kháng nhiệt [DATA_NEEDED: junction-to-ambient thermal resistance] —
Supply Voltage Range — 3 V to 3.6 V
Nominal Supply Voltage — 3.3 V
Maximum Signaling Rate — 50 Mbps
Driver Count — 1
Receiver Count — 1
Bus Standard — RS-485
Khoảng nhiệt độ hoạt động — -40°C to +125°C
ESD Protection — Human Body Model and IEC Contact Discharge on bus pins
IEC Contact Discharge Protection — ±12 kV
Fault Protection Voltage — -13 V to +16.5 V

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá