SP485E vs MAX485ESA+T 比較

詳細な並列比較: SP485E メーカー: MaxLinear および MAX485ESA+T メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Analog Devices
MAX485ESA+T MAX485ESA+T - 2.5Mbps RS-485/RS-422 Transceiver | ADI

MAX485ESA+T - 2.5Mbps RS-485/RS-422 Transceiver | ADI

MAX485ESA+T ✓ 生産中

仕様比較

パラメータ SP485E MAX485ESA+T
ブランド MaxLinear Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
機能 Transceiver —
Protocol RS-485, RS-422 —
Number of Drivers/Receivers 1/1 —
Duplex Half-duplex —
データレート 2.5 Mbps (max, SP485E non-slew-limited) —
Supply Voltage (VCC) 4.75 V to 5.25 V —
Receiver Input Sensitivity ±200 mV [DATA_NEEDED: receiver input sensitivity]
Receiver Input Impedance 12 kΩ minimum, 15 kΩ typical —
Common-Mode Range −7 V to +12 V —
ESD Protection (HBM) ±15 kV —
ESD Protection (IEC 61000-4-2 Air Discharge) ±15 kV —
動作温度範囲 [DATA_NEEDED: operating temperature] [DATA_NEEDED: operating temperature range]
パッケージ 8-pin NSOIC or PDIP 8-pin SOIC
実装タイプ Surface Mount (NSOIC) or Through-Hole (PDIP) Surface mount
Process Technology BiCMOS —
Failsafe Receiver Yes (open, shorted, idle bus) —
Tri-State Enable Pins Yes (DE, RE) —
RoHS ステータス Compliant unknown
Product Type — RS-485/RS-422 transceiver
Transceiver Configuration — 1 driver and 1 receiver
Operating Mode — Half-duplex
Supply Voltage Range — 4.75 V to 5.25 V
Maximum Data Rate — 2.5 Mbps
Slew Rate Limiting — Not limited
Driver Short-Circuit Protection — Current limited and protected
Supported Standards — RS-485 and RS-422
Package Pin Count — 8 pins
電源電流 — [DATA_NEEDED: supply current]
Driver Output Current — [DATA_NEEDED: driver output current]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — unknown
AEC-Q100 Qualification — unknown

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼