SP485EN-L vs MAX485EESA+ 比較

詳細な並列比較: SP485EN-L メーカー: MaxLinear および MAX485EESA+ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ SP485EN-L MAX485EESA+
ブランド MaxLinear Analog Devices
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $0.00 $1.42
Product Type Half-duplex differential transceiver RS-485/RS-422 Transceiver
Interface Standards RS-422 and RS-485 —
Maximum Data Rate 5 Mbps —
Supply Voltage Range 4.75V to 5.25V —
Nominal Supply Voltage 5 V —
動作温度範囲 -40°C to +85°C -40 °C to +85 °C
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Duplex Mode Half-duplex —
Receiver Input Type Differential Schmitt-trigger input —
Process Technology BiCMOS —
パッケージ 8-pin SOIC —
Package Width 3.9 mm —
Package Length 4.9 mm —
実装タイプ Surface mount Surface Mount
Transceiver Count per Package 1 —
Supply Decoupling Requirement [DATA_NEEDED: recommended decoupling capacitor value and ESR] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Propagation Delay [DATA_NEEDED: receiver and driver propagation delay] —
Input Impedance [DATA_NEEDED: receiver input impedance] —
Shutdown Function [DATA_NEEDED: shutdown or power-save support] —
RoHS ステータス unknown —
REACH Status unknown —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
データレート — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Driver Slew Rate — Limited (low-EMI)
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
パッケージ / ケース — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
MSLレベル — 1 (Unlimited)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼