STM32L072KBU7 vs STM32L071KBU6 比較
詳細な並列比較: STM32L072KBU7 メーカー: STMicroelectronics および STM32L071KBU6 メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
STMicroelectronics
STM32L071KBU6 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071KBU6 ✓ 生産中仕様比較
| パラメータ | STM32L072KBU7 | STM32L071KBU6 |
|---|---|---|
| ブランド | STMicroelectronics | STMicroelectronics |
| カテゴリ | Microcontrollers | Microcontrollers |
| ライフサイクル状態 | 有効 | 有効 |
| Manufacturer | STMicroelectronics | — |
| Product Series | STM32L0 Series | — |
| Device Family | STM32L072xx | — |
| CPU Core | ARM Cortex-M0+ | — |
| Architecture | 32-bit RISC | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 128 KB (128K × 8) | 128 KB |
| SRAM | [DATA_NEEDED: SRAM capacity] | 20 KB |
| 動作電源電圧 | 2.5 V or 3.3 V | — |
| USB Interface | USB 2.0 crystal-less | — |
| パッケージ | 32-pin UFQFPN (5 mm × 5 mm) | 32-pin UFQFPN, 5 mm x 5 mm |
| Exposed Pad | Present | — |
| 実装タイプ | Surface Mount | Surface mount |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum GPIO Count | [DATA_NEEDED: GPIO count] | [DATA_NEEDED: GPIO count] |
| ADC Resolution | [DATA_NEEDED: ADC resolution] | [DATA_NEEDED: ADC resolution] |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | RoHS3 compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | 32-bit ultra-low-power microcontroller |
| Processor Core | — | Arm Cortex-M0+ |
| Flash Organization | — | 128K x 8 bits |
| Operating Voltage Range | — | 1.65 V to 3.6 V |
| Series | — | STM32L0 |
| Product Line | — | STM32L071 access line |
| Instruction Set | — | Arm Cortex-M0+ |
| Peripheral Set | — | [DATA_NEEDED: complete peripheral list] |
| Clock Sources | — | [DATA_NEEDED: clock source configuration] |
| Low-Power Modes | — | [DATA_NEEDED: low-power mode list and current consumption] |
| Exposed Pad Requirement | — | [DATA_NEEDED: exposed-pad electrical and thermal requirements] |