STM32L072KBU7 - 32MHz Cortex-M0+ 128KB Flash | ST
部品番号: STM32L072KBU7 ✓ 生産中STM32L072KBU7 概要
An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption during active operation, sleep, standby, and wake-up transitions. The STM32L0 Series belongs to the hierarchy microcontroller → 32-bit RISC microcontroller → ARM Cortex-M0+ microcontroller → ultra-low-power embedded MCU. This makes it suitable for battery-operated sensors, portable measurement equipment, connected accessories, and industrial devices that spend most of their operating time in a low-power state.
The verified configuration includes a 32 MHz ARM Cortex-M0+ core, 128 KB of flash memory, USB 2.0 crystal-less operation, and operation from 2.5 V or 3.3 V supply levels. The microcontroller is identified in a 32-UFQFPN 5 mm × 5 mm package with an exposed pad. Its 128 KB program memory provides room for application firmware, USB device firmware, communication stacks, and field-upgrade routines without requiring external program memory.
The STM32L072KBU7 is based on the STM32L072KB device family. STMicroelectronics describes the STM32L072xx line as combining ultra-low-power behavior with USB 2.0 crystal-less connectivity, allowing USB clock recovery without a discrete crystal when the board budget and clock-tolerance requirements permit. Because the supplied data does not enumerate RAM capacity, GPIO count, temperature limits, or individual peripheral ratings, those values are marked as data needed rather than inferred.
Typical uses include USB-connected sensor nodes, compact data loggers, low-energy industrial monitors, firmware-update gateways, and handheld measurement instruments. The compact package also suits USB accessories and embedded systems where board area is constrained. Firmware can use the USB interface for enumeration and data transfer while retaining the Cortex-M0+ ecosystem of development tools, peripheral libraries, and application support.
Designers should confirm the exact pin mapping, exposed-pad connection, decoupling requirements, and low-power current budgets against the STM32L072KB manufacturer documentation before layout release. The provided distributor summaries do not expose complete electrical or thermal tables, so no ADC accuracy, temperature range, or current-consumption value is asserted here. The exposed thermal pad should be evaluated as a potential ground and heat-spreading connection according to the manufacturer's land-pattern guidance.
This page consolidates verified distributor specifications, same-family drop-in candidates, application guidance, and design considerations that are not presented together on a typical distributor listing. Because no verified cross-brand pin-compatible substitute was identified in the supplied cross-reference results, the alternatives are limited to documented STM32L0 family variants rather than padding the list with mechanically similar but electrically different devices.
ドロップイン代替品: STM32L072KBU7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
STM32L072KBU6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32L071KBU6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32L072KCU6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32L071KCU6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32L072KBU7 最大定格＆電気的特性
| Manufacturer | STMicroelectronics |
| Product Series | STM32L0 Series |
| Device Family | STM32L072xx |
| CPU Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB (128K × 8) |
| 動作電源電圧 | 2.5 V or 3.3 V |
| USB Interface | USB 2.0 crystal-less |
| パッケージ | 32-pin UFQFPN (5 mm × 5 mm) |
| Exposed Pad | Present |
| 実装タイプ | Surface Mount |
STM32L072KBU7 32-pin ufqfpn (5 mm × 5 mm) ピン配置ガイド
STM32L072KBU7 (32-pin ufqfpn (5 mm × 5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L072KBU7.
詳細は データシート をご参照ください。
主な用途
STM32L072KBU7 の用途: 6 件s: USB-Connected Sensor Node, Battery-Powered Environmental Monitor, USB Firmware-Update Gateway, Compact Industrial Data Logger, Low-Energy Wearable Monitor, Portable Medical Measurement Device.
USB-Connected Sensor Node
The STM32L072KBU7 fits compact USB sensor nodes because its 128 KB flash stores acquisition firmware and USB device code, while the 32 MHz Cortex-M0+ core handles digital conversion and control tasks. Crystal-less USB 2.0 operation can reduce discrete clock-component count and PCB area. The 32-pin UFQFPN package is only 5 mm × 5 mm, allowing the controller, USB connector, sensing circuitry, and power regulator to coexist on a dense board. Designers should validate USB clock-recovery margin, bus-length limits, and EMI with the final cable, connector, and enclosure because those system details determine compliance more than the MCU headline specification.
おすすめ
Battery-Powered Environmental Monitor
The STM32L072KBU7 suits battery-powered environmental monitoring when low standby energy and fast peripheral processing are both important. Its 32 MHz Cortex-M0+ core can execute sampling, filtering, and local alarm logic, while the STM32L0 ultra-low-power architecture supports duty-cycled operation between measurement events. The 128 KB flash provides headroom for calibration tables, event logs, and field-update firmware. Because the verified excerpts do not provide active or sleep current, battery life must be calculated from manufacturer low-power figures plus sensor, regulator, and communications load; a battery life target should never be based on processor specifications alone.
おすすめ
USB Firmware-Update Gateway
The STM32L072KBU7 is appropriate for a USB firmware-update gateway that receives field upgrades, validates image integrity, and coordinates a controlled reboot. Its 128 KB flash provides room for a bootloader, USB communication firmware, and application code, and its USB 2.0 crystal-less capability can simplify the interface. The 32 MHz Cortex-M0+ core is fast enough to perform transfer orchestration and basic checksum work. The exact update protocol should include authenticated images, power-loss recovery, and version rollback; those security and resilience features are more important than replacing the MCU with a higher-frequency part.
おすすめ
Compact Industrial Data Logger
The STM32L072KBU7 can serve as the control processor in a compact industrial data logger that records sensor readings, timestamps events, and transfers data through USB. The 32 MHz Cortex-M0+ core provides sufficient performance for protocol handling and data formatting, and 128 KB of flash can hold firmware and nonvolatile configuration. Its small 5 mm × 5 mm UFQFPN package leaves board area for storage and interface components. Designers should use the exposed pad according to the manufacturer land pattern, provide the recommended supply bypassing, and separate sensitive analog or high-current sections to prevent logger activity from disturbing measurements.
おすすめ
Low-Energy Wearable Monitor
The STM32L072KBU7 is suitable for a low-energy wearable monitor because the STM32L0 family targets ultra-low-power embedded processing and the 5 mm × 5 mm UFQFPN package minimizes board area. The 128-bit-wide flash configuration described as 128K × 8 provides 128 KB of code storage for movement algorithms, event classification, and communication firmware. A wearable design should keep the radio and analog front end switched except during measurement intervals rather than treating the MCU as the only power consumer. Skin-contact safety, battery protection, antenna coexistence, and regulatory limits remain system-level requirements that the controller specification alone cannot satisfy.
おすすめ
Portable Medical Measurement Device
The STM32L072KBU7 can control a portable medical measurement device that combines sensor acquisition, a local display or status indicator, and USB data export. Its 32 MHz Cortex-M0+ core supports real-time sampling and control, and 128 KB of flash accommodates measurement routines and a USB interface. Crystal-less USB can reduce board size in a handheld enclosure, although medical designs must validate electrical isolation, leakage current, alarm behavior, and risk controls independently. The MCU grade and temperature limits should also be checked against the intended ambient range before it is used in a clinical accessory where measurement accuracy and fault handling are critical.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L072KBU7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L072KBU6 | STM32L071KBU6 | STM32L072KCU6 | STM32L071KCU6 |
|---|---|---|---|---|---|
| Package | 32-UFQFPN (5x5) | 32-UFQFPN (5x5) - same | 32-UFQFPN (5x5) - same | 32-UFQFPN (5x5) - same | 32-UFQFPN (5x5) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 64 KB (-50%) | 64 KB (-50%) |
| Temperature Grade | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
主な差別化要因
- Retains full 128 KB program memory during pin-compatible substitution （vs STM32L072KCU6)
- Broader temperature grade than the U6 package variant （vs STM32L072KBU6)
- Uses the STM32L072 feature set rather than the reduced STM32L071 family （vs STM32L071KBU6)
- Doubles the available flash memory of the 64 KB STM32L072 option （vs STM32L072KCU6)
設計ノート
Route the USB differential pair as a controlled-impedance pair, keep the connector and transceiver path away from switching nodes, and follow the manufacturer layout and exposed-pad guidance. Place input and output bypass capacitors close to their corresponding supply pins and minimize loop area. Crystal-less USB can reduce component count, but it does not eliminate the need for careful return-path planning, connector placement, or EMI validation on the finished board.
Budget the power tree from the complete system rather than the 32 MHz CPU frequency. Select the regulator so its dropout and efficiency meet the 2.5 V or 3.3 V operating requirement across the minimum load, while retaining headroom for the USB transceiver and sensor analog circuitry. Validate active, sleep, and standby current using the manufacturer low-power tables; those values were not included in the verified excerpts and must not be estimated from the MCU clock rate alone.
Do not substitute a 64 KB flash variant without checking the firmware image size and RAM assumptions, because STM32L072KCU6 and STM32L071KCU6 provide 50% less flash than the STM32L072KBU7. Also verify temperature-grade requirements before using a U6 variant. Pin compatibility alone does not guarantee regulatory, peripheral, timing, or firmware compatibility, so each substitution requires a manufacturer-document review.
Use the exposed pad as directed by the manufacturer's package drawing and land-pattern guidance. Its thermal and electrical role must be confirmed rather than assumed, and the copper connection should follow the recommended pattern for both stability and heat spreading. The supplied data contains no power dissipation, junction temperature, or thermal resistance figures, so thermal performance should be calculated from actual utilization and the published package data.
コンプライアンス情報
The verified distributor snippets do not provide compliance declarations. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from the current STMicroelectronics product documentation before qualification.
