10CX105YF780E5G - Cyclone 10 GX FPGA, 105K LE, 780-BGA | Intel
部品番号: 10CX105YF780E5G ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $485 | $485.00 |
| 10 | $460 | $4,600.00 |
| 100 | $420 | $42,000.00 |
| 500 | $385 | $192,500.00 |
| 1,000 | $350 | $350,000.00 |
10CX105YF780E5G 概要
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks, configurable interconnects, and dedicated hard IP blocks such as transceivers, PLLs, and DSP slices. FPGAs occupy the middle ground between fixed-function ASICs and software-driven microcontrollers: they offer hardware-level parallelism and deterministic latency for applications like video processing, industrial networking, and motor control, while still being reprogrammable in the field. Cyclone 10 GX sits within Intel's low-power FPGA portfolio, optimized for cost and power efficiency while integrating 12.5 Gbps transceivers and a hard memory controller — a feature set historically reserved for higher-end Stratix families.
Key features of the 10CX105YF780E5G include 105K logic elements, 38,000 adaptive logic modules (ALMs), 8.439 Mbits of embedded SRAM, 284 user I/Os, hard 12.5 Gbps GX transceivers, variable-precision DSP blocks, and hard PCIe Gen2 controllers. The device supports DDR3 external memory interfaces up to 933 MHz, and integrates a hard floating-point arithmetic block on each DSP. Multiple PLLs and global clock networks provide flexible clock domain management.
Cyclone 10 GX uses a 20 nm process with TSMC's low-power technology, enabling a typical core power of less than 1 W per 100K LE plus transceiver contribution. The hard IP for transceivers, PCIe, and memory controllers reduces soft logic overhead, freeing programmable fabric for application-specific logic. The FCBGA-780 package offers controlled-impedance signal routing for high-speed serial links.
Typical applications include industrial machine vision, video broadcast and surveillance, software-defined radio, factory automation controllers, and PCIe-based accelerator cards. The combination of transceivers and low power makes Cyclone 10 GX especially attractive for fanless embedded systems with high-speed serial I/O.
When designing with this device, allocate PCB stackup budget for the FCBGA's 1.0 mm ball pitch and use Intel's Quartus Prime toolchain for synthesis, place-and-route, and timing closure. Pay close attention to transceiver channel placement and reference clock routing to maintain signal-integrity at 12.5 Gbps.
This page synthesizes distributor pricing, package-specific alternatives, and practical Quartus design guidance not consolidated in the official Cyclone 10 GX datasheet.
ドロップイン代替品: 10CX105YF780E5G — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 10CX105YF780E5G （同一形状・フットプリント） — 相違点: Speed Grade, Logic Elements, Package, Operating Temperature, Adaptive Logic Modules (ALMs).
クイック比較ツール — 並列比較する代替部品を選択:
10CX105YF780I5G
✅ ドロップイン✓ 在庫あり
$115 / 個
データシートを見る →10CX105YF780I6G
✅ ドロップイン✓ 在庫あり
$1495 / 個
データシートを見る →10CX105YF780E6G
✅ ドロップイン✓ 在庫あり
$580 / 個
データシートを見る →10CX105YF780C8G
✅ ドロップイン📋 参考代替品（カタログ未掲載）
10CX105YF780C7G
✅ ドロップイン📋 参考代替品（カタログ未掲載）
10CX105YF780I7G
✅ ドロップイン📋 参考代替品（カタログ未掲載）
10CX105YF780E5G 最大定格＆電気的特性
| Family | Cyclone 10 GX |
| Logic Elements | 105,000 |
| Adaptive Logic Modules (ALMs) | 38,000 |
| Embedded Memory (bits) | 8,641,536 (8.439 Mbit) |
| Number of User I/Os | 284 |
| Number of Logic Cells | 104,000 |
| Process Technology | 20 nm |
| パッケージ | 780-ball FCBGA (F780) |
| Ball Pitch | 1.0 mm |
| 動作電源電圧 | 0.9 V (core) |
| Speed Grade | 5 |
| 動作温度 | 0 C to +100 C (commercial) |
| 実装スタイル | SMD/SMT |
| Transceivers | GX transceivers up to 12.5 Gbps |
| RoHS ステータス | Compliant |
10CX105YF780E5G 780-ball fcbga (f780) ピン配置ガイド
10CX105YF780E5G (780-ball fcbga (f780) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 10CX105YF780E5G.
詳細は データシート をご参照ください。
主な用途
10CX105YF780E5G の用途: 6 件s: Industrial Machine Vision, Video Broadcast and Surveillance, Software Defined Radio, PCIe Accelerator Cards, Factory Automation Controllers, 5G Small Cell and Fronthaul.
Industrial Machine Vision
The Intel 10CX105YF780E5G fits industrial machine vision because its 105K logic elements provide the parallel processing fabric needed for pixel-level algorithms (Sobel, Canny, color-space conversion), while the 12.5 Gbps GX transceivers handle CoaXPress or GigE Vision uplink to a host PC. The 8.439 Mbit embedded SRAM buffers full image lines, reducing external DDR traffic. Compared with a CPU-only approach, Cyclone 10 GX delivers deterministic sub-millisecond frame latency critical for high-speed inspection lines. The commercial 0 to +100 C grade suits factory-floor enclosures.
おすすめ
Video Broadcast and Surveillance
The 10CX105YF780E5G suits video broadcast and surveillance encoders because its 105K LE fabric supports multi-channel H.264/H.265 pipelines, while 12.5 Gbps transceivers carry SDI (3G/6G/12G-SDI) or SMPTE 2110 IP video streams. The 284 user I/Os enable parallel camera input multiplexing without external crosspoint switches. Compared with ASIC encoders, the FPGA allows field upgradeability for emerging codecs. The FCBGA-780 package routes 12G-SDI signals with controlled impedance for signal-integrity compliance with SMPTE standards.
おすすめ
Software Defined Radio
The 10CX105YF780E5G is well-matched to software-defined radio (SDR) baseband processing where 12.5 Gbps transceivers connect directly to RF ADCs/DACs and the 105K LE plus variable-precision DSP blocks implement channelizers, FFTs, and demodulators. Hard floating-point DSP reduces soft logic usage for complex modulation schemes. The 8.439 Mbit embedded memory supports symbol-rate buffering between FFT stages. Compared with a DSP-only implementation, Cyclone 10 GX offers better parallelism for multi-channel MIMO receivers.
おすすめ
PCIe Accelerator Cards
The 10CX105YF780E5G includes a hard PCIe Gen2 controller, enabling direct endpoint connectivity to host CPUs without consuming programmable fabric. The 105K LE supports custom compute kernels, and the 284 I/Os provide ample GPIO for card management. Compared with PCIe soft-IP cores, the hard Gen2 controller saves approximately 10K LE and improves latency determinism. The FCBGA-780 package supports the high-speed PCIe SerDes lane routing required by card-edge connectors.
おすすめ
Factory Automation Controllers
For factory automation PLC and motion controllers, the 10CX105YF780E5G combines 105K logic elements for IEC 61131-3 logic execution with 12.5 Gbps transceivers for EtherCAT or PROFINET IRT master connectivity. The 284 I/Os handle parallel sensor/actuator wiring, while the hard memory controller interfaces DDR3 for program and trace storage. Compared with microcontroller-based PLCs, Cyclone 10 GX delivers faster deterministic cycle times. The commercial 0 to +100 C grade suits climate-controlled cabinets.
おすすめ
5G Small Cell and Fronthaul
The 10CX105YF780E5G's 12.5 Gbps transceivers map cleanly to CPRI and eCPRI fronthaul links between 5G baseband units and radio units. The 105K LE handles PHY-layer digital predistortion and crest-factor reduction algorithms, while hard DSP blocks accelerate FFT/iFFT for PRACH and PUCCH processing. Compared with general-purpose DSPs, Cyclone 10 GX offers lower latency for closed-loop DPD adaptation. The FCBGA-780 footprint supports the high pin density required for multi-sector fronthaul aggregation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 10CX105YF780E5G — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 10CX105YF780I5G | 10CX105YF780I6G | 10CX105YF780E6G | 10CX105YF780C8G |
|---|---|---|---|---|---|
| Package | 780-ball FCBGA (F780) | 780-ball FCBGA (F780) - same | 780-ball FCBGA (F780) - same | 780-ball FCBGA (F780) - same | 780-ball FCBGA (F780) - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 105,000 | 105,000 (same silicon) | 105,000 (same silicon) | 105,000 (same silicon) | 105,000 (same silicon) |
| Temperature Grade | Commercial 0C to +100C | Industrial -40C to +100C | Industrial -40C to +100C | Commercial 0C to +100C | Commercial 0C to +100C |
| Speed Grade | 5 | 5 (same) | 6 (slower) | 6 (slower) | 8 (slower) |
| Embedded Memory | 8.439 Mbit | 8.439 Mbit | 8.439 Mbit | 8.439 Mbit | 8.439 Mbit |
| User I/Os | 284 | 284 (same) | 284 (same) | 284 (same) | 284 (same) |
| Transceivers | 12.5 Gbps GX (Y variant) | 12.5 Gbps GX (same) | 12.5 Gbps GX (same) | 12.5 Gbps GX (same) | 12.5 Gbps GX (same) |
| Process / Family | 20 nm Cyclone 10 GX | 20 nm Cyclone 10 GX (same) | 20 nm Cyclone 10 GX (same) | 20 nm Cyclone 10 GX (same) | 20 nm Cyclone 10 GX (same) |
主な差別化要因
- Same silicon as industrial variant enables cost-flexible inventory （vs 10CX105YF780I5G)
- Higher Fmax at speed grade 5 vs slower alternatives （vs 10CX105YF780E6G)
- Mid-density sweet spot for transceiver-rich designs （vs 10CL120YF780I7G)
設計ノート
The 780-ball FCBGA package with 1.0 mm ball pitch requires a high-density PCB stackup. Use at least an 8-layer board with microvia (HDI) technology for inner-row ball breakout. All transceiver channels need 100-ohm differential routing with length matching to within 0.127 mm (5 mil) per the Intel Cyclone 10 GX PCB design guidelines. Place decoupling capacitors on the bottom side directly beneath the BGA, using 0402 or 0201 sizes for the highest-frequency core and transceiver supplies.
Estimated: With all 12 transceiver channels active at 12.5 Gbps and 105K LE utilization around 70%, total power is approximately 6 to 8 W. The FCBGA-780 has no integrated heatsink, so a thermal pad plus heatsink or substantial PCB copper pour is required. Without thermal management, junction temperature can exceed 100 C in still air at commercial ambient. Use Quartus Prime's Early Power Estimator before board layout to size the thermal solution correctly.
Pin allocation must follow Intel's Cyclone 10 GX pin connection guidelines: unused transceiver channels must be left open with proper AC coupling cap placement, and dedicated clock input pins should be reserved for high-frequency reference clocks feeding the transceivers. The PCIe hard IP pins are bank-specific - do not swap them with GPIO. Run Quartus Pin Planner early to validate the I/O bank assignments against your schematic.
For 12.5 Gbps GX transceivers, follow Intel's transceiver signal-integrity checklist: controlled-impedance stripline on inner layers, length-matched differential pairs, and continuous reference plane beneath the traces. AC-coupling capacitors (typically 100 nF 0402) must be placed near the transmitter side. Reference clock jitter must meet the strict Cyclone 10 GX phase noise requirements; use a low-jitter clock generator such as the Si5341 for system reference.
コンプライアンス情報
RoHS and lead-free per Intel/Alterax product declarations on distributor listings. Not AEC-Q100 qualified (commercial grade FPGA). REACH compliant per Intel product page.
