5CGXBC9E6F31C7N - Cyclone V GX FPGA, 301K LE, 896-FBGA | Intel
部品番号: 5CGXBC9E6F31C7N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $485 | $485.00 |
| 10 | $462.5 | $4,625.00 |
| 100 | $422 | $42,200.00 |
| 250 | $395 | $98,750.00 |
| 500 | $372 | $186,000.00 |
| 1,000 | $348 | $348,000.00 |
5CGXBC9E6F31C7N 概要
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose logic function is defined after manufacturing by a configuration bitstream loaded into on-chip SRAM. FPGAs sit hierarchically between fixed-function Application-Specific Integrated Circuits (ASICs) and general-purpose processors, combining hardware-level parallelism with software-defined reconfiguration. Within the broader category of programmable logic, the Cyclone V family targets cost- and power-sensitive applications, positioned below the high-end Stratix family and above the entry-level MAX series. Cyclone V GX adds integrated transceivers and a hard PCIe Gen2 IP block for connectivity-oriented designs.
Key features of the 5CGXBC9E6F31C7N include 8-input adaptive logic modules (ALMs) for fine-grained DSP and arithmetic pipelines, variable-precision DSP blocks supporting 18x18 and 27x27 multipliers, and dedicated hard memory controllers for DDR3, DDR2, and LPDDR2 external memory. The device also provides up to four PLL clock managers and 12 global clock networks, enabling jitter-clean distribution across the fabric. On-chip security features include AES-256 configuration bitstream encryption and JTAG-based IEEE 1149.1 boundary-scan support.
The 5CGXBC9E6F31C7N is designed using Intel's Quartus Prime design software, which provides synthesis, place-and-route, timing analysis, and bitstream generation through the standard FPGA tool flow. Designers describe logic in Verilog, SystemVerilog, or VHDL, then target specific logic elements, DSP blocks, memory blocks, and IOE features. Compared to ASIC design, this FPGA enables rapid prototyping and field-upgradable products with no NRE charges.
Typical applications for the 5CGXBC9E6F31C7N include industrial machine vision, video broadcast equipment, motor control, software-defined radio (SDR), and PCIe-based I/O cards. The combination of high logic density, integrated transceivers, and low static power makes it well suited for cost-sensitive embedded systems requiring custom high-speed serial interfaces and DSP pipelines.
When designing with this device, allocate sufficient PCB area for the 31 mm x 31 mm 896-FBGA package and follow Intel's PCB layout guidelines for impedance-controlled 100-ohm differential pairs for transceiver channels, and a multi-layer stackup with continuous ground planes beneath the BGA. Decoupling requires multiple bulk and high-frequency ceramic capacitors placed close to all VCCINT, VCCA, and VCCD_PLL pins per the Quartus power analysis report.
ドロップイン代替品: 5CGXBC9E6F31C7N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5CGXBC9E6F31C7N （同一形状・フットプリント） — 相違点: DSP Blocks (18x18), Operating Temperature, PLLs, Package, Transceivers.
クイック比較ツール — 並列比較する代替部品を選択:
5CGXFC9E6F31C7N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGXFC9E6F31I7N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGXBC9E6F31C8N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGXBC9D7F31C8N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGXBC7D7F31C8N
✅ ドロップイン✓ 在庫あり
$198 / 個
データシートを見る →5CGXBC9E6F31C7N 最大定格＆電気的特性
| Family | Cyclone V GX |
| Logic Elements | 301,000 |
| Adaptive Logic Modules (ALMs) | 113,560 |
| Embedded Memory | 14,251,008 bits |
| Embedded Memory Blocks (M9K) | 1,720 |
| DSP Blocks (18x18) | 342 |
| Maximum User I/O | 480 |
| Transceivers | 12 (3.125 Gbps) |
| PCIe Hard IP Blocks | 2 (Gen2 x1, x2, x4) |
| PLLs | 6 |
| Global Clock Networks | 12 |
| Process Node | 28 nm TSMC |
| Core Supply Voltage (VCCINT) | 1.1 V |
| Maximum Internal Clock Frequency | 800 MHz |
| 動作温度 | -40C to +85C (industrial) |
| パッケージ | 896-pin FBGA (F31) |
| Package Dimensions | 31 mm x 31 mm |
| RoHS ステータス | Compliant |
5CGXBC9E6F31C7N 31 mm x 31 mm ピン配置ガイド
5CGXBC9E6F31C7N (31 mm x 31 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 5CGXBC9E6F31C7N.
詳細は データシート をご参照ください。
主な用途
5CGXBC9E6F31C7N の用途: 6 件s: Industrial Machine Vision, Software Defined Radio (SDR), Industrial Motor Control, Video Broadcast Processing, PCIe I/O Cards and Embedded Compute, Smart City Sensor Aggregation.
Industrial Machine Vision
The 5CGXBC9E6F31C7N is well matched to industrial machine vision systems where parallel image sensor interfaces, real-time pre-processing, and GigE Vision output converge. With 480 user I/Os it can drive multi-lane LVDS or sub-LVDS image sensors directly; 342 18x18 DSP blocks accelerate Sobel, Gaussian, and FFT pipelines at 100+ MHz pixel rates; and 12 integrated 3.125 Gbps transceivers consolidate GigE Vision, Camera Link, or 10 GigE aggregation. The 28 nm low-power process keeps total board power under 10 W, enabling fanless sealed IP67 camera housings. Typical designs pair the FPGA with an external DDR3 buffer, a PoE+ PD controller, and a microcontroller for housekeeping. Compared to a DSP+ASIC approach, the Cyclone V GX cuts BOM cost and supports late-stage algorithm changes via bitstream updates.
おすすめ
Software Defined Radio (SDR)
The 5CGXBC9E6F31C7N is a strong fit for software-defined radio platforms targeting sub-6 GHz wireless, public-safety, and industrial telemetry. The 12 transceivers handle ADC/DAC JESD204B links, CPRI up to 3.072 Gbps to a baseband processor, or direct antenna digitization; 342 DSP blocks implement wideband channelizers, FFTs, and digital downconverters at full rate; and 14 Mbits of block RAM support multi-symbol correlation buffers. The hard PCIe Gen2 x4 block enables low-latency host offload for demodulation in a host PC or SBC. Power dissipation is typically 5-8 W on this workload, manageable with a 1 oz copper 6-layer PCB and no active heatsink in well-ventilated enclosures. Quartus Prime provides the DSP Builder flow for MATLAB-to-FPGA model-based design, accelerating algorithm iteration.
おすすめ
Industrial Motor Control
The 5CGXBC9E6F31C7N serves multi-axis servo and stepper motor controllers with high-resolution PWM, encoder feedback, and fieldbus connectivity. Its 480 user I/Os support up to 12 axes of quadrature encoder input plus multi-channel PWM output; 342 DSP blocks execute FOC (field-oriented control) and SVPWM math at 50 kHz loop rates; and the PCIe hard IP block enables real-time host monitoring over PCI Express industrial PC links. The 1.1 V core supply combined with 28 nm process delivers low dynamic power suitable for DIN-rail mounted controllers. Designers typically add external isolated gate drivers and a Cortex-M0 companion MCU for safety and housekeeping functions. Compared to MCU-only motor control, the FPGA enables advanced algorithms (sensorless FOC, adaptive notch filters) without CPU loading.
おすすめ
Video Broadcast Processing
The 5CGXBC9E6F31C7N supports broadcast video processing for SDI routing, multiviewer walls, and format conversion in studio and OB-van equipment. The 12 transceivers drive 12G-SDI, 6G-SDI, or quad-link 3G-SDI links at up to 12 Gbps when paired with external cable equalizers; 14 Mbits of on-chip memory serves as line buffers and FIFO storage for scalers and deinterlacers; and 342 DSP blocks implement chroma keying, scaling, and OSD blending. The 800 MHz maximum fabric clock supports 4K60 4:2:2 pixel pipelines at full rate. Power consumption typically sits in the 6-10 W range, allowing chassis designs with passive cooling. Quartus Prime VIP supports SMPTE ST 424, ST 425, and ST 2082 IP cores.
おすすめ
PCIe I/O Cards and Embedded Compute
The 5CGXBC9E6F31C7N is a natural choice for half-length, full-height PCIe add-in cards that need high-density glue logic, DMA engines, or protocol acceleration. Two hard PCIe Gen2 IP blocks (x1, x2, or x4) provide root-port or endpoint capability without consuming fabric logic; 12 transceivers expose external high-speed serial links (USB 3.0, SATA, SFP+) to the host; and 14 Mbits of block RAM serve as scatter-gather DMA descriptor caches. Common deployments include data-acquisition cards, NVMe-over-PCIe controllers, and protocol-bridge adapters. The -40C to +85C industrial temperature grade supports server-room and industrial PC environments. Designers use Intel's PCIe hard IP plus a soft DMA engine in Quartus Prime to achieve Gen2 line rate with minimal logic utilization.
おすすめ
Smart City Sensor Aggregation
The 5CGXBC9E6F31C7N can serve as the central processing node in smart-city sensor aggregation hubs that combine traffic, environmental, and surveillance feeds. Its 480 user I/Os aggregate dozens of GPIO-based sensor inputs (counter, I2C, SPI) via I/O expansion; 12 transceivers backhaul aggregated data over fiber (SFP+) or cellular (via companion modem); and the 800 MHz fabric runs edge analytics such as traffic-flow counting and anomaly detection. The low 0.85 W static power allows solar-powered roadside deployments with battery buffering. Compared to an SoC-based design, the FPGA enables hardware-accelerated sensor pre-processing and deterministic latency. Pair with industrial-temperature SPI NOR flash (e.g. 25Q series) for boot image storage.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5CGXBC9E6F31C7N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5CGXFC9E6F31C7N | 5CGXFC9E6F31I7N | 5CGXBC9E6F31C8N | 5CGXBC9D7F31C8N | 5CGXBC7D7F31C8N |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 896-FBGA (F31) | 896-FBGA (F31) | 896-FBGA (F31) | 896-FBGA (F31) | 896-FBGA (F31) | 896-FBGA (F31) |
| Speed Grade | C7 (commercial-industrial) | C7 | I7 (-40C to +100C) | C8 (faster) | C8 | C8 |
| Process Node | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
主な差別化要因
- Higher density than Xilinx Artix-7 XC7A100T at lower price point for transceiver-rich designs （vs XC7A100T-2FGG676I)
- Higher operating temperature grade option in identical package （vs 5CGXBC9E6F31C7N vs 5CGXFC9E6F31I7N)
- Speed-grade upgrade preserves logic density and package （vs 5CGXBC9E6F31C8N)
設計ノート
The 896-FBGA F31 package has a 1.0 mm ball pitch on a 31 mm x 31 mm body, requiring a minimum 6-layer PCB stackup with 0.5 oz copper on outer layers and 1 oz on inner layers for adequate current delivery to VCCINT balls. Use 0.8 mm via-in-pad microvias with filled/capped plating on BGA pads to meet Intel's Cyclone V GX PCB guidelines; unfinished vias trap solder and create open joints. Maintain a continuous ground reference plane in the layer directly beneath the BGA, and route all transceiver differential pairs to 100 ohm +/-10% impedance per the Intel Cyclone V GX handbook chapter on high-speed board design.
Estimated: at 800 MHz fabric utilization with 80% logic toggle rate and all 12 transceivers active, VCCINT current can reach 3-4 A requiring a switching regulator with at least 5 A peak capability. Use Intel's PowerPlay early power estimator within Quartus Prime to model your specific design's power profile before committing to a power architecture. Decouple each VCCINT ball with a 0.1 uF X7R 0402 capacitor placed within 2 mm of the ball; bulk decoupling with 220 uF polymer tantalum capacitors at the regulator output provides charge reservoir for transient current steps. VCCA (PLL analog) requires an additional ferrite-bead isolated rail with 10 uF + 0.1 uF decoupling to minimize jitter.
Do not route LVDS pairs over split ground planes - return-path discontinuities cause EMI and timing failures. Configure unused transceiver channels in the Quartus pin planner as 'no connect' rather than leaving them floating; floating channels can couple noise into adjacent active lanes and degrade BER. When migrating from a Cyclone IV design, verify that PCIe hard IP base address and BAR configuration match the host BIOS expectations, as Cyclone V hard IP has different reset and initialization sequencing. Finally, ensure configuration mode pins MSEL[2:0] are set correctly for your selected configuration scheme (AS, PS, JTAG, or FPP); incorrect MSEL values cause silent configuration failures that appear as device dead-on-arrival.
コンプライアンス情報
RoHS compliance per Intel Cyclone V product family documentation. Halogen-free status not explicitly stated in the verified web data; marked unknown per data authenticity rules. Not AEC-Q100 qualified - this is an industrial/commercial FPGA not an automotive-grade part.
