Microchip Technology

A3P400-FGG256 - 400K Gate FPGA, 231 MHz | Microchip

部品番号: A3P400-FGG256 ✓ 生産中
1.5 V Vdss 256-LBGA / 256-pin FBGA Package 231 MHz Speed Flash-based Memory
MOQ: 1 |

A3P400-FGG256 概要

The Microchip Technology A3P400-FGG256 is a ProASIC3 field-programmable gate array with 400,000 equivalent gates, 178 I/O, and a maximum clock frequency of 231 MHz, supplied in a 256-pin FBGA package. The 256-LBGA arrangement supports dense programmable-logic designs requiring substantial I/O connectivity in a compact surface-mount footprint.

A field-programmable gate array is a programmable-logic semiconductor whose configuration defines digital circuits after manufacture. An FPGA belongs to the broader programmable-logic device hierarchy, alongside complex programmable logic devices, while its parallel configurable logic, routing fabric, and programmable I/O allow one device to implement control, datapath, interface, and protocol functions. The ProASIC3 family combines nonvolatile Flash configuration with a single-chip FPGA solution and supports reprogrammability.

The A3P400-FGG256 provides 5K logic elements according to its distributor product listing, 178 I/O, and a 1.5 V supply specification. Its 400,000-equivalent-gate capacity is suitable for consolidating multiple fixed-function logic blocks into one programmable component. The 231 MHz operating specification gives designers a defined performance target for synchronous control logic, peripheral bridges, and embedded data-processing functions.

ProASIC3 devices use four I/O banks with dedicated bank supplies, allowing compatible voltage standards to be assigned within each bank. This bank-oriented architecture is important when planning mixed-voltage interfaces because I/O assignments must respect each supply domain. Device configuration is stored in Flash, allowing the same hardware design to be updated for field upgrades, protocol revisions, or logic corrections without replacing the FPGA.

Typical applications include industrial control, communications, instrumentation, embedded test equipment, and compact embedded systems where parallel logic density and generous I/O are valuable. The device is particularly suitable when firmware-driven product variations or field updates justify using programmable logic instead of a large collection of fixed-function devices.

PCB planning should account for the fine-pitch 256-ball package, power-supply distribution across multiple rails, and high-speed routing into the BGA array. Designers should preserve the manufacturer's recommended power, decoupling, and layout practices and verify every I/O-bank voltage assignment against the selected interface standards before releasing the PCB.

This page combines the A3P400 family specifications, package and programming characteristics, sourcing guidance, alternative-device analysis, and practical PCB considerations to support faster component selection and design planning.

ドロップイン代替品: A3P400-FGG256 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

A3P400-FGG256I

✅ ドロップイン
📦 256-LBGA / 256-pin FBGA
Retains the A3P400 family and FGG256 256-ball package, but the I suffix denotes a distinct ordering grade; the 231 MHz target specification is not independently stated for this variant, supporting a 90% rating.

📋 参考代替品(カタログ未掲載)

A3P400-FGG256YI

✅ ドロップイン
📦 256-LBGA / 256-pin FBGA
The variant specifies 400,000 equivalent gates, 9,216 LABs, and a 256-terminal 1.00 mm-pitch S-PBGA-B256; the target specifies 231 MHz, while this variant's frequency is not stated, supporting a 90% rating.

📋 参考代替品(カタログ未掲載)

A3P400-FGG256 最大定格&電気的特性

Product Type ProASIC3 field-programmable gate array (FPGA)
Equivalent Gate Count 400,000 gates
Logic Elements 5K LEs
Maximum Frequency 231 MHz
I/O Count 178 I/O
Core Supply Voltage 1.5 V
Programmable Logic Blocks 9,216 LABs
パッケージ 256-LBGA / 256-pin FBGA
Package Type S-PBGA-B256
Ball Pitch 1.00 mm
実装タイプ Surface mount
Shipping Format Tray
Configuration Memory Flash-based
I/O Bank Count 4 banks
Programmability Field-programmable and reprogrammable

A3P400-FGG256 s-pbga-b256 ピン配置ガイド

A3P400-FGG256 (s-pbga-b256 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

A3P400-FGG256 の s-pbga-b256 パッケージピン配置図

詳細なピン配置データはありません: A3P400-FGG256.

詳細は データシート をご参照ください。

主な用途

A3P400-FGG256 の用途: 6 件s: Industrial Machine Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Data Acquisition, Programmable Security and Access Control, Aerospace Ground Support Equipment.

🏭

Industrial Machine Control

The A3P400-FGG256 fits industrial machine-control logic that needs extensive external connections, deterministic programmable logic, and field-update capability. Its 400,000 equivalent gates and 5K logic elements can consolidate sequencing, sensor interfaces, actuator controls, and supervisory logic, while 178 user I/O reduce the need for external I/O expanders. The 231 MHz maximum frequency supports clocked control and data-processing blocks. Its four I/O banks allow compatible voltage standards to be grouped, making it useful for systems combining machine I/O with communications peripherals. Flash-based configuration also permits controlled firmware revisions without replacing the device.

🌐

Communications Interface Consolidation

The A3P400-FGG256 is suitable for communications equipment requiring parallel datapaths, protocol conversion, and a high pin count in a compact package. The 400,000-equivalent-gate device provides capacity for framing, buffering, clock-domain crossing, test logic, and communications control functions, while 178 I/O supports multiple interfaces. Its four I/O banks help organize compatible voltage standards, and the 231 MHz maximum frequency accommodates demanding synchronous logic. Flash-based configuration allows deployed equipment to receive protocol or functional updates through its configuration path, reducing the need for separate programmable devices.

🔧

Test and Measurement Instrumentation

The A3P400-FGG256 can consolidate instrument control, acquisition sequencing, pattern generation, and status logic within one programmable device. Its 5K logic elements and 400,000-equivalent-gate capacity provide ample parallel logic for coordinating sensors, ADC channels, triggers, and communications, while 178 I/O offer broad external connectivity. The four-bank I/O structure permits compatible voltage groups, which is useful in instruments combining logic-level control with other interface standards. At a 231 MHz maximum device frequency, the FPGA can implement clocked measurement and digital-processing functions subject to routing and timing closure.

📟

Embedded Data Acquisition

The A3P400-FGG256 fits embedded acquisition systems that must gather parallel sensor data and perform digital conditioning without relying on a fixed logic configuration. Its 178 I/O provide substantial sensor, control, and communications connectivity, while 400,000 equivalent gates support sampling sequencing, filtering, calibration tables, and data framing. The four I/O banks allow compatible voltage standards to be assigned within each bank. The 231 MHz maximum frequency can serve time-critical datapaths, and Flash-based reprogramming permits calibration profiles or functional revisions to be updated after deployment while preserving the same hardware platform.

🔒

Programmable Security and Access Control

The A3P400-FGG256 can implement programmable authentication, authorization, protocol, and event-logic functions where field configuration is valuable. Its 400,000-equivalent-gate capacity supports parallel matching engines, state machines, encryption-related control logic, and peripheral interfaces, while 178 user I/O accommodates external sensors, memories, and communication links. The four-bank arrangement permits compatible logic voltage domains, and the 231 MHz maximum frequency supports synchronous cryptographic and protocol-control blocks after routing. Flash-based configuration allows security policy or interface revisions to be deployed as controlled device updates.

✈️

Aerospace Ground Support Equipment

The A3P400-FGG256 is suitable for programmable ground-support and test systems that need extensive I/O, adaptable logic, and configuration updates. The 256-ball package provides 178 user I/O for equipment interfaces, while 400,000 equivalent gates can combine sequencing, telemetry handling, data capture, and communications control. Four I/O banks support compatible voltage grouping, and the 231 MHz maximum frequency supports synchronous ground-processing functions. Because the exact suffix determines environmental and qualification attributes, use the YI ordering variant only when its official grade and qualification satisfy the deployment requirement.

おすすめ製品の概要

A3P400-FGG256I Same-family same-package ordering variant 使用用途: Industrial Machine Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Data Acquisition, Programmable Security and Access Control, Aerospace Ground Support Equipment A3P400-FGG256YI Same-family same-package ordering variant 使用用途: Industrial Machine Control, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded Data Acquisition, Programmable Security and Access Control, Aerospace Ground Support Equipment
What are the key specifications of A3P400-FGG256 that engineers should know?
The A3P400-FGG256 is a ProASIC3 FPGA with 400,000 equivalent gates, 5K logic elements, 178 I/O, and a 231 MHz maximum frequency in a 256-pin FBGA package. According to the Microchip A3P400 product page and the manufacturer datasheet, it is a Flash-based, reprogrammable FPGA organized into four I/O banks. These figures make it suitable for consolidated control logic, datapath functions, and communications interfaces where a fixed collection of standard logic devices would be less flexible.
What is the A3P400-FGG256 and what does it do?
The A3P400-FGG256 is a 400,000-equivalent-gate ProASIC3 FPGA that implements reconfigurable digital logic and programmable I/O in one 256-pin FBGA device. According to the Microchip A3P400 manufacturer documentation, ProASIC3 devices provide Flash-based configuration, reprogrammability, small-footprint packaging, and a single-chip implementation approach. The A3P400 variant is suited to industrial, communications, instrumentation, and embedded applications requiring both logic density and a high pin count.
Where can I download the A3P400-FGG256 datasheet PDF?
The A3P400-FGG256 datasheet is available through the official Microchip A3P400 product page at https://www.microchip.com/en-us/product/A3P400. According to the manufacturer product page, the A3P400 family is part of the ProASIC3 Flash FPGA family. Use the product page to locate the current family datasheet, package information, programming resources, and lifecycle documentation before compiling the exact ordering code into a production design.
Where can I find the A3P400-FGG256 pinout and BGA layout?
The A3P400-FGG256 pinout must be taken from the manufacturer A3P400 package drawings because it contains 256 BGA terminals and includes multiple supply and configuration connections. According to the Microchip manufacturer datasheet, use the package pin-definition table together with the ball-grid layout for PCB escape routing. Assign signal pins through the vendor-supported device and package data, and confirm every power, ground, configuration, and I/O-bank connection against the selected A3P400 variant.
How many I/O pins does the A3P400-FGG256 have?
The A3P400-FGG256 provides 178 user I/O and uses a 256-pin FBGA package. According to the Microchip A3P400 manufacturer documentation, the difference between total package balls and user I/O is used for power, ground, configuration, and other fixed functions. The 178-I/O figure is therefore the relevant number for external interface planning, while the full 256-ball footprint must still be laid out and supplied on the PCB.
What is the maximum operating frequency of A3P400-FGG256?
The A3P400-FGG256 is listed with a maximum operating frequency of 231 MHz. According to the Microchip A3P400 family documentation, achievable design performance depends on device speed grade, logic placement, routing congestion, I/O standards, and timing constraints. Treat 231 MHz as a device-level ceiling rather than a guaranteed clock rate for every design, and complete post-route static timing analysis under the actual voltage, temperature, and loading conditions.
What power voltage does the A3P400-FGG256 use?
The A3P400-FGG256 is specified with a 1.5 V core supply. According to the Microchip A3P400 family datasheet, the device also uses separate supplies for different I/O banks and dedicated power pins within the package. The bank supplies must be selected to match the voltage standards assigned to each I/O group. Review the complete pin table, power-up sequence, decoupling requirements, and I/O-bank rules before finalizing the power architecture.
Is A3P400-FGG256 suitable for industrial control systems?
The A3P400-FGG256 is suitable for many industrial-control functions when its exact temperature grade and qualification status match the deployment environment. Its 400,000-equivalent-gate capacity, 178 I/O, four I/O banks, and 231 MHz maximum frequency support complex sequencing, sensor conditioning interfaces, communications, and machine-control logic. According to the Microchip A3P400 documentation, confirm the ordering suffix, temperature range, and applicable industrial certifications for the production environment.
Can A3P400-FGG256 be used for communications equipment?
The A3P400-FGG256 can suit communications equipment that needs parallel programmable logic, flexible I/O standards, and field-configurable firmware behavior. Its 178 I/O and four-bank architecture allow compatible voltage domains to coexist, while the 231 MHz device ceiling supports clocked interface and packet-processing logic. According to the Microchip ProASIC3 documentation, validate each interface timing, drive strength, and voltage standard in the selected package and speed grade.
What is the difference between A3P400-FGG256 and A3P400-FGG256I?
The A3P400-FGG256 and A3P400-FGG256I identify different A3P400 ordering codes associated with the same FGG256 package and family, but the exact suffix-specific difference must be confirmed from Microchip ordering information. According to the manufacturer A3P400 documentation, package and ordering suffixes can identify electrical grade or qualification attributes. Do not assume interchangeability until the speed grade, temperature range, and qualification markings have been compared on the official part pages.
What can replace the A3P400-FGG256 as a drop-in part?
A3P400-FGG256I is the closest identified same-package alternative because it retains the A3P400 family and FGG256 package designation. However, it is not automatically a drop-in replacement because suffix-specific speed grade, temperature range, and qualification requirements must match. According to the Microchip A3P400 ordering documentation, verify those attributes and rerun device, pin, timing, and PCB compatibility checks before approving a substitution.
When should I choose A3P400-FGG256 instead of another ProASIC3 device?
Choose A3P400-FGG256 when a design needs approximately 400,000 equivalent gates, 178 user I/O, and a 256-ball package rather than a smaller or differently packaged FPGA. According to the Microchip A3P400 family documentation, choosing within the ProASIC3 series should be driven by logic capacity, I/O needs, package, speed grade, power rails, and qualification. A smaller device may simplify cost and layout, but it can reduce logic and routing resources.
Is A3P400-FGG256 compatible with A3P400-FGG256YI?
A3P400-FGG256 and A3P400-FGG256YI share the A3P400 family identity and the FGG256 256-ball package designation, making YI a same-package migration candidate. They are not proven interchangeable until suffix-specific temperature, qualification, and ordering attributes are confirmed. According to the Microchip A3P400 family documentation, also verify device revision, speed grade, supported I/O standards, and timing in the original design.
Where can I buy A3P400-FGG256 and what is the current lead time?
Use the Request a Quote form on this page to ask for A3P400-FGG256 availability, MOQ, lead time, and delivery options. The manufacturer product page identifies the A3P400 family, while distributor product pages identify the exact A3P400-FGG256 ordering code and list sourcing information. Current stock and lead time can change by region and quantity, so request a formal quotation rather than relying on an outdated listing snapshot.
What is the price of A3P400-FGG256?
The current A3P400-FGG256 price is determined by quantity, availability, and the requested delivery configuration. Use the Request a Quote form on this page for a current quotation and volume-break request for the exact 256-pin FBGA ordering code. According to the Microchip A3P400 product documentation, the ordered suffix matters because device grade and qualification attributes can affect sourcing. The quotation should explicitly identify A3P400-FGG256 rather than a generic A3P400 family number.

エンジニアリング参考データ: A3P400-FGG256 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the A3P400-FGG256 when a design requires 400,000 equivalent gates, 178 user I/O, and up to 231 MHz operation in a 256-ball FBGA package. It is particularly useful where four I/O banks, Flash-based reprogrammability, and consolidated programmable logic can replace several fixed-function devices. A3P400-FGG256I is the closest same-package candidate when its suffix-specific speed grade, temperature range, and qualification attributes satisfy the project. A3P400-FGG256YI may suit applications requiring that ordering grade, and it shares the 256-terminal S-PBGA-B256 format, but its 9,216 LABs and 400,000-gate listing should be matched against the design. Do not select an A3P400 device in another package for a drop-in migration. Before replacing the target, confirm electrical grade, supported I/O standards, timing, temperature requirements, qualification, device revision, and complete package-ball compatibility.

代替品との比較

パラメータ この製品 A3P400-FGG256I A3P400-FGG256YI
Brand Microchip Technology Microchip Technology Microchip Technology
Package 256-LBGA / 256-pin FBGA 256-LBGA / 256-pin FBGA 256-terminal S-PBGA-B256
FPGA Family ProASIC3 A3P400 / ProASIC3 A3P400 / ProASIC3

主な差別化要因

  • High logic density combined with a high pin count (vs A3P400-FGG256I)
  • Documented 231 MHz operating ceiling (vs A3P400-FGG256YI)
  • Four-bank I/O architecture (vs A3P400-FGG256I)

設計ノート

Reserve a continuous 1.00 mm-pitch escape strategy for the 256-ball FBGA and follow the manufacturer package drawing when assigning every ball. Place BGA decoupling and supply connections close to their associated balls, keep sensitive configuration and clock routes away from noisy switching nodes, and maintain uninterrupted return paths. The package contains power, ground, configuration, and user-I/O balls in addition to the 178 user I/O, so a complete 256-ball escape is required.

Design the 1.5 V core rail and all four I/O-bank supplies independently, with adequate local decoupling and low-impedance distribution to every related power ball. Assign I/O standards only when the voltage is compatible with the selected bank supply. Follow the manufacturer power-up, decoupling, and sequencing requirements, and verify transient behavior across the full 231 MHz device frequency and worst-case I/O loading.

Do not treat A3P400-FGG256, A3P400-FGG256I, and A3P400-FGG256YI as automatically interchangeable because the suffix may alter speed grade, temperature range, or qualification. Check the official ordering guide, confirm device revision, and recompile or reanalyze timing-sensitive logic. Also avoid assuming that the 400,000-equivalent-gate figure predicts logic utilization; actual capacity depends on LAB, routing, memory, clock, and I/O allocation.

Use the manufacturer's clock and I/O guidance to control skew, loading, and edge quality, especially when the design approaches the 231 MHz device ceiling. Place clock inputs and configuration interfaces away from high-switching nets, match external interfaces to the selected I/O-bank voltage, and apply signal-integrity analysis to long routes, connectors, and board transitions. Run post-route static timing analysis with actual external loading rather than relying on the nominal device frequency alone.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The family marketing information identifies ProASIC3 Flash FPGAs, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for A3P400-FGG256 was not identified. Verify the current manufacturer product and material declarations for the ordered suffix.

データ検証日: 2026-11-08 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

a3p400 pqg208i a3p400 pqg208 a3p400 fgg256i A3P400-FGG256 datasheet A3P400-FGG256 datasheet pdf A3P400-FGG256 pinout A3P400-FGG256 equivalent A3P400-FGG256 replacement A3P400-FGG256 vs A3P400-FGG256I Microchip A3P400-FGG256 A3P400-FGG256 400K gate FPGA A3P400-FGG256 256 FBGA A3P400-FGG256 industrial control A3P400-FGG256 price A3P400-FGG256 stock

関連部品&用語

Microchip Technology A3P400-FGG256 A3P400-FGG256I A3P400-FGG256YI A3P400 ProASIC3 field-programmable gate array FPGA programmable logic device semiconductor Flash configuration memory logic array block LAB logic element I/O bank equivalent gate count maximum operating frequency FBGA 256-LBGA S-PBGA-B256 surface-mount package industrial control communications equipment test and measurement embedded data acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示